Event: ● Saturday racing at Central TN, Lavergne, TN

Racing on Saturday, January 12, 2013. Track will open at 9 AM with tech closing at 10 AM for the first race. Race fees are $9 per race. Race all three for only $25! Schedule of races and rules are listed below.
 
10 AM tech closes for first race. Qualifying, then racing.

First race: 4" NASCAR - Any 4" stamped steel chassis, commercially available. Parma COT body, any thickness. Cut on the lines. Rear spoiler must not be more than 1-5/8" from the tech block. Motors allowed are the Parma 16D or Pro Slot 4002 Chinese arm. Any black tire is legal but NO Speed rubber. Must have front wheels and be able to see them. Any Lexan interior allowed but no drooping. Must not be able to see chassis when look down on car. Rear clearance will have to be .062" up to the rear axle. Must have three numbers on body.
 
Second race will be 45 minutes after the finish of first race.  Tech will close then.
 
Second race will be 4.5" FCR with any JK 4.5" truck body. Sealed Parma 16D motor, Lexan interior. Any black rear tires but NO Speed rubber.  Minimum tire diameter is .840". Front clearance of .032" will be measured right behind the front tires with the guide flag off the tech block. Must have three numbers on body. Body height maximum is 1-7/8".
 
Third race will begin after the finish of the second race.
 
Retro Can-Am will be the third race of the day. We will be racing under the IRRA™ rules with one exception: we will allow the Pro Slot 4002 Chinese arm motors.
 
Box plaques will be given to the winners of all three races. Come on out if you are in the area and enjoy some fun with us. 

If you have any questions, please feel free to give me a call at (615) 556-9167 and I will try to answer them. Come on out and enjoy the racing on "The Black Snake".
 
Thanks,

Rick