SCRRA Retro racing returns to the Piranha King track this Saturday with the usual monthly racing schedule. F1 begins the day with a 10 AM start followed by a lunch break after the racing with Can Am starting in the early afternoon, usually around 1 or 2 PM. See you there!
SCRRA King track racing Sat at Piranha - 5/28, Whittier, CA
#1
Posted 24 May 2022 - 09:43 AM
- Tim Neja, Jason Holmes and Tim Wood like this
#2
Posted 31 May 2022 - 07:40 PM
A light turnout had 6 racers for F1 on the King track. As usual we ran 2 races and combined the results for the totals.
F1 RESULTS
1) Dale Yamashita 367 Laps
2) Duran Trujillo 366
3) Bryan Warmack 347
4) Sam Rackham 342
5) Mike Reese 333
6) Bill Vanderziel 329
Super close racelong battle between Dale and Duran with Dale just ahead at the end!.... and Bryan a distant 3rd.
F1 Podium Cars
1st Place Dale Yamashita Hansen chassis
2nd Place Duran Trujillo Hi Tech chassis
3rd Place Bryan Warmack Warmack chassis
Can Am up next........
- Jim Lange and Eddie Fleming like this
#3
Posted 31 May 2022 - 08:12 PM
We picked up one racer and ended up with 7 for Can Am.
CAN AM RESULTS
1) Duran Trujillo 391 Laps
2) Dale Yamashita 385
3) Bill Vanderziel 375
4) Sam Rackham 373
5) Bryan Warmack 368
6) Mill Conroy 366
7) Mike Reese 353
Actually a pretty good race as everyone was running well with some close racing! Great run Mike with a decent 353 lap total!
Fastest race lap to Bill V with a 3.545.
Can Am Podium cars
1st Place Duran Trujillo Trujillo chassis
2nd Place Dale Yamashita Yamashita chassis
3rd Place Bill Vanderziel Hi Tech chassis
Congrats Dale and Duran on the wins! Thanks Mill for race directing the F1 race. Next SCRRA Retro race at Piranha on the Flat track on the 11th of June. See you there!
- Jim Lange and Eddie Fleming like this
#4
Posted 01 June 2022 - 07:50 PM
Is there any way Piranha can print out lap totals by heat. It would be neat to see how it goes down.
#5
Posted 01 June 2022 - 11:38 PM
Is there any way Piranha can print out lap totals by heat. It would be neat to see how it goes down.
Jim,
I'm sure the computer and race programs are capable. Whoever the race director is just needs to load the program to print out every heat. At BPR both tracks were set up this way. Obviously, once set up the only drawback is that it use a lot more paper and ink.
#6
Posted 02 June 2022 - 10:42 AM
- Eddie Fleming likes this
A motor is only as fast as the chassis it's in.
Dominic Luongo
Like Dominator Custom Chassis on Facebook
NERR photos from 2012-April 2016
NERR photos from 2016 to now
#7
Posted 02 June 2022 - 02:26 PM
Cry like a baby, drive like a girl, walk like a man.
Give me enough rope and I'll build a fast car... or hang myself?
#8
Posted 02 June 2022 - 03:36 PM
#9
Posted 02 June 2022 - 03:55 PM
Cry like a baby, drive like a girl, walk like a man.
Give me enough rope and I'll build a fast car... or hang myself?