New TSR Slot Cars website
#1
Posted 19 October 2010 - 07:09 PM
Philippe de Lespinay
#2
Posted 19 October 2010 - 07:38 PM
Mill Conroy
AKA : TWO LAP CONROY, Anointed Trigger Monkey by Mike Swiss
Deal me life's toughest cards, without chance for hope nor fame, just let me play this one last hand, and I'll win this whole damn game.
Second Most Interesting Man in the World.
#3
Posted 19 October 2010 - 07:45 PM
I see you are using Fly body's for the chassis in 1:32 and what are you using for 1:24?
Is this a NSR style of philosophy, by Philippe!
Nesta
Nesta Szabo
In this bright future you can't forget your past.
BMW (Bob Marley and the Wailers)
United we stand and divided we fall, the Legends are complete.
I'm racing the best here at BP but Father time is much better then all of us united.
Not a snob in this hobby, after all it will be gone, if we keep on going like we do, and I have nothing to prove so I keep on posting because I have nothing to gain.
It's our duty to remember the past so we can have a future.
Pistol Pete you will always be in my memory.
#4
Posted 19 October 2010 - 07:51 PM
Steve King
#5
Posted 19 October 2010 - 08:32 PM
Congratulations on launching the new site! Best wishes and continued good luck to you!
As you know I have been excited about your cars for several years and have a few in the stable so seeing this notification got me going! Nesta says your cars are pricey but compared to what you get elsewhere they are more bang for the buck than the other RTRs.
I signed up to create an account but as yet have not perused the entire site. I did look through the "new products" section hoping to see a 1/24 wheel I'd like to be able to buy but it's not there yet... a TSRF wheel for the Indy Grips 3101 tire for which I have adapted your THP2405 wheels to fit.
See HERE.
This Indy Grip tire also fits the BRM cars and could be a spec tire for some sort of series. (?)
Maybe we could even use those Porsche bodies like you use Slot-it bodies in 1/32.
I did see a slight mistake in the listing for the THP2412 TSR/Ortmann rear tire. It states that the tire "fits over THP2403 or THP2406."
THP2403 is a front wheel with no set screw and THP2406 is an optional body mount. What the description should say is that the tire fits over the THP2405 wheel(?). You may want to verify that I am correct and change that before someone builds a car with tires on the body mounts which would look like a tug boat.
Anyway my intent is not to pick the site apart, only to inform you of this one possible issue.
I am hoping that I can use this renewed effort on your part to convince some of the Arizona Garage Racers to start a 1/24 series now and eventually a 1/32 series as well.
As always, best wishes.
Dave Deuble
AZGR One
I'd rather be racing!
#6
Posted 19 October 2010 - 09:09 PM
A new aluminum wheel is in the works for the 1/24 scale chassis to fit the very tire you are describing.
Scott's kids are playing with 1/32 scale TSR cars at the museum track and at 28 months old, already stay on track and race each other...
Best regards,
Philippe
Philippe de Lespinay
#7
Posted 20 October 2010 - 12:36 AM
Barney Poynor
12/26/51-1/31/22
Requiescat in Pace
#8
Posted 12 November 2010 - 10:39 AM
#9
Posted 22 November 2010 - 10:17 PM
My life fades, the vison dims. All that remains are memories... from The Road Warrior
#10
Posted 24 February 2011 - 08:46 PM
Steve Smith
Smith Scale Speedway
#11
Posted 24 February 2011 - 09:17 PM
Philippe de Lespinay
#12
Posted 25 February 2011 - 11:20 AM
"Drive it like you're in it!!!"
"If everything feels under control... you are not going fast enough!"
Some people are like Slinkies... they're really good for nothing... but they still bring a smile to your face when you push them down a flight of stairs.