|
Builder
Posted 22 November 2016 - 05:34 PM
Thanks Paul, and speaking of hauling beans, more weight in an IRRA® stock car never hurts.
My ol' 2009 Bill Worden/Rob Hanson tripod chassis needed freshening up so I built a ground zero 15 thou shaker platform for it.
.063 tubing governed with .020 piano wire. Some fore and aft movement, slight wiggle, slight lift, and zero droop.
No solid connection between the rails. Champion 7 gram weight attached via double sided wing car tape
Paul Wolcott
Checkered Flag in Hand
Posted 23 November 2016 - 07:40 PM
Nice builds Pablo, but no Snake Bites?
Builder
Posted 24 November 2016 - 09:55 AM
Red Valantine still races his Snakebite Can Am chassis competitively but they are tricky to tune and that line sort of drifted off into history 
Paul Wolcott
Builder
Posted 29 November 2016 - 04:55 PM
Track test results with new shaker platform and weight: excellent, much improved.
New Outisight Daytona Charger body with Champion interior. Total weight: 132 g
Paul Wolcott
JenCar17
Posted 29 November 2016 - 05:36 PM
Builder
Posted 07 March 2017 - 07:29 PM
John Clow's stock car chassis from 2014 recently returned to The Wolcott Ranch for a tune up.
-new rear axle tubes with new VXB ball bearings
-new front axle for new ARP BB front wheels
-addition of a 15 thou shaker weight platform
-revised pan down stop wires
-new pan hinge tubes
Paul Wolcott
