|
DR Racing Products
Posted 06 November 2014 - 10:32 PM
How does one change out the brush and spring when the fingers are numb from diabetes?
I launched several springs and brushes trying to change out a set in my mega-g 1.5 chassis, I was using a fine set of tweezers.
My wife suggested I use a photo light tent to work in. Has any one tried that? I am open to any suggestions so I don't need to have a constant order for parts from Terry in Florida
John Andersen
DR Racing Products
Posting Leader
Posted 06 November 2014 - 10:54 PM
i put one finger over the comm area and slowly detach the brush tube, installing... do the reverse.
This space for rent
Posted 07 November 2014 - 12:02 PM
Does anyone make threaded brush barrels that you can install?
I have not worked on the Mega-G, but the brush barrel system is the same as other HO scale cars that have threaded brush barrels.
"Racing makes heroin addiction look like a vague wish for something salty" - Peter Egan
Grand Champion Poster
Posted 09 November 2014 - 08:45 PM
Does anyone make threaded brush barrels that you can install?
I have not worked on the Mega-G, but the brush barrel system is the same as other HO scale cars that have threaded brush barrels.
Wizzard HO?
Click HERE to contact Sonic Products. The messenger feature on my Slotblog account has been disabled.
This space for rent
Posted 10 November 2014 - 09:12 AM
"Racing makes heroin addiction look like a vague wish for something salty" - Peter Egan
On The Lead Lap
Posted 10 November 2014 - 11:24 AM
Try working inside a clear plastic box. That way when parts go flying the box will catch them. Also try tweezers and geezer goggles to help you see and grab stuff.
