Posted 01 May 2016 - 03:54 PM
Gary, we are mainly running the JK C11 (0.025 gauge) or the X25 center section with C11 .025" side pans. Some guys might be running other stuff, but the C11 and the X25 dominate. The Mossetti chassis have just come out. I bought one two piece chassis and one three piece. The motor is JK Retro Hawk which you are very familiar with. I will post a couple pics a bit later. You can run both car classes with the same chassis/motor setup if you have a JK chassis, because only JK chassis are allowed in the JK LMP car class.
Here is a pic for you.
The chassis on the left is the JK X25 (JK PN JKX25) with side pans and the other is the C11 (JK PN JK250112C).
I hope this helps. I think that your best bet is to go to the Marcos's track in Winter Garden on Tuesday or Thursday evening. He's got what you need on the wall.
Doc Dougherty
GRRR 2016 GT Coupe and Stock Car Champion and Overall Champion
My Series Spring 2016 4" NASCAR, JK LMP State Champion, and Endurance State Champion
My Series 2015 4" NASCAR, GTP and Endurance State Champion
GRRR 2015 4 1/2" and F1 Champion
GRRR 2013 & 2014 Evil Flexi Champion
1968 Cleveland Car Model Series race winner - Tom Thumb Raceway, North Royalton, Ohio
1968 Hinsdale ARCO Amateur runner-up
1967 Parma Raceway Indy 500 Champion