Jump to content




Photo

Chicagoland Raceway product listing


49 replies to this topic

#1 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 19 June 2017 - 07:19 PM

It's long, long overdue, but I finally got some cards and oiler labels made, and am going to start selling to distributors, shortly.
 
The first distributor I approached, Eagle Distributing, has agreed to take on my line, and I hope to get them out product before I leave for a short vacation, on Friday.
 
I'll also approach the other distributors  ASAP.
 
I'll be listing items in this thread, with stock #'s, pics, and descriptions, to facilitate the distributors, raceways, and racers, on ordering items from their respected outlet, up the "food chain".

20170619_190604-1.jpg


  • Jencar17, team burrito, kvanpelt and 3 others like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516





#2 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 11 August 2017 - 08:00 PM

CR001 Cross-Country oil
 
$4.95 retail each
 
This is the synthetic oil that I used to lubricate the JK car when I did the durability/longevity test for JK Products on their Hawk 25 rental motor.
 
What was supposed to be a "quick" test, to confirm the motor would last 5-6 hours, turned into a 232+ hour, maxi-marathon, over 2+ months, rubberbanding a controller, and the car running full speed around Orange lane on my King track.
 
In the final weeks, I was running the car 8 hrs.+, at a time, running it overnight at times, with no stops for lubrication.
 
Finally after 232 1/2 hours of running, one of the brushes, along with the leaf spring it was attached to, wore through, and the car stopped.
 
Using the lap times to conservatively calculate the amount of total laps the car run, it was determined the car ran well over 3400 REAL miles, or literally from coast to coast, Pacific to Atlantic ocean.
 
The axle and motor bushings survived fine, lubricated exclusively by C/R Cross Country oil.
 
To keep the price down, I was able to find an affordable bottle, that also had the nice feature of an attached cap.
 
So you have the triple threat of slot racing oils.
 
The best oil, at the best price, with the best container.
 
20170811_152247-1.jpg 20170811_152414-1.jpg


  • Steve Deiters, NSwanberg and grooverunner like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#3 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 11 August 2017 - 08:19 PM

CR002 Econo Tripod Wing car chassis

$12.00 retail each
 
A spectacular price for this Brazilian made, wire tripod chassis, that was state of the art before single piece steel chassis made their way into the Box Stock rules.

 

20170811_205810-1.jpg
 


  • Pablo and Jencar17 like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#4 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 11 August 2017 - 08:44 PM

Note; discontinued and replaced by CR022 which is the same chassis, but plated.

CR003 Econo Group F Wing car chassis kit
 
$24.95 retail each kit
 
Laser-cut, fully hardened, .050" spring steel. Approx. 4.61 guide lead.
 
Will accept all JK and Proslot, FK and Euro MK 1 minimotors, along with modern C can motors.
 
A combination of begging, and buying a large quantity, from my vendor, allows me to sell this at this great price.
 
A chassis at this price truly allows a car in the Group F / "$100 Wing Car " class, be made for less than $100.
 
When designing this, I was hoping for good, but while I was gone on vacation, I was informed, racers who struggled for consistency in the make it or break it spot, on my swoopy, but NON ellipically routed,  King, the Lead-on, in Purple and Black, found themselves running great up there, along with the rest of the track.
 
It now holds all my Group F records (single heat laps, total laps, single lap time), and has dominated my Wednesday night Group F wing racing, along with being undefeated in the two races we've held in our newly formed Group F and Group FK12 classes in the monthly John Austin Fun Races.
 
20170811_171625-1.jpg
  • Jencar17 and David Reed like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#5 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 12 August 2017 - 07:44 PM

CR004 True 2 degree guide tongue
 
$16.50 retail (zip-loc bag of 3 pcs.)
 
Laser-cut, fully hardened, .050" spring steel.
 
Slot racing's first , and only, ground 2 degree tongue.
 
Surface ground on a special fixture, to achieve your 2 degree tilt, without tipping the front of your tongue up.
 
Virtually unbendable, proper guide stops, perfect fit for new Red Fox guide posts.
 
Centering notch, and laser side cuts, for ease of centering and clearance.
 
Slots for confirming full solder flow.
 
Used by chassis building luminaries, Tony P, Ed Sohl, Brian X-Pro, Cap Henry.
 
20170812_191639-1.jpg
 
20170812_191324-1.jpg
 
20170812_191259-1.jpg

20170812_200815-1.jpg
  • Tim Neja, kvanpelt, Brian Cochrane and 2 others like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#6 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 12 August 2017 - 08:21 PM

CR005 Hardened steel guide tongue
 
$12.00 retail (zip-loc bag of 3 pcs.)
 
Flat / unground version of CR004.
 
Laser-cut, fully hardened, .050" spring steel.
 
Virtually unbendable, proper guide stops, perfect fit for new Red Fox guide posts.
 
Centering notch, and laser side cuts, for ease of centering and clearance.
 
Slots for confirming full solder flow.
 
20170812_203401-1.jpg

20170812_203956-1.jpg


  • Brian Cochrane likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#7 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 12 August 2017 - 08:52 PM

CR006 Retro tech tool and front wheel centering jig
 
$24.95 retail each
 
Laser-cut, fully hardened, .050" spring steel.
 

I think the tool is worth it just for the centering for all 3 types of IRRA® front wheel track widths, but here is the 20 things, the tool does.

 

1 • 3.000” max track and car width Stock Car

2 • 3.125” max track and car width CanAm / GTC
3 • 3.250” max track width F1
4 • 1.625” max chassis width F1
5 • .750" min front tire dia CanAm / GTC / F1 (also max Stock Car guide lead)
6 • .790" min rear tire dia F1
7 • .812" min rear tire dia All / front Stockcar (also .810" max rear tire width) (+.002") All
8 • .225" min front tire width CanAm / GTC
9 • .375" min front tire width F1 / Stock Car
10 • .050" min rear chassis clearance All + front Stock Car 
11 • 1.375” max rear body height CanAm / GTC / F1 w/spoiler
12 • .500" max spoiler height CanAm / GTC
13 • 4.500” min wheelbase Stock Car
14 • 3.875” min wheelbase F1

15 • 4.250” max wheelbase F1

16 • .063" min body front grill CanAm / GTC (except Ti22)

17 • .125" min body front grill F1

18 • 3.000” front wheel track centering Stock Car

19 • 3.125” front wheel track centering CanAm / GTC

20 • 3.250” front wheel track centering F1

 

20170812_210311-1.jpg

 

20170812_211057-1.jpg


  • Brian Cochrane likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#8 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 24 August 2017 - 03:26 PM

CR007 McLaren M7C clear body

 

$7.50 retail each (1 per pack)
 
.010" (only) thick Retro body.
 
First(only?) Retro body created using 3D printing.
 
Great detail and a well-defined, perfect cut line.
 
This year's winner, at Retro racing's biggest race of the year, R4.
 
Now with a window mask.
 
20170823_153646-1.jpg

 

20170823_155133-1.jpg


Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#9 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 24 August 2017 - 04:02 PM

CR008 3/32" brass wheel keepers

 

$30.00 retail (zip-loc bag of 100 pcs.)
 
Excellent price on high quality, brass wheel keepers.

 

The smaller diameter boss is a thicker/larger, .121" OD, and slightly chamfered, for easier removal.

 

.085" wide - can also be used as axle spacers.

 

Zip-loc bag for ease of per pc. sales

 

20170823_161701-1.jpg

 

20170823_162928-1.jpg


  • C. J. Bupgoo likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#10 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 24 August 2017 - 04:22 PM

CR009 1/16" brass pre-cut pin tubes
 
$20.00 retail (zip-loc bag of 100 pcs.)
 
Incredible price on these .600" long, pre-cut, burr-free, K & S 1/16" dia. tubes.
 
Can also be used as an easy to solder to, filler for small gaps in a motor installation, along for general gusseting.
 
Zip-loc bag for ease of per pc. sales
 
Every raceway needs a bag of these on their peg board.
 
20170823_161256-1.jpg

 

20170823_161327-1.jpg


  • tonyp likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#11 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 24 August 2017 - 04:42 PM

CR010 3/32" ID, .100" long, brass pre-cut axle spacers
 
$10.00 retail (4 zip-loc bag of 10 pcs.)
 
Along with use as axle apacers, these pre-cut 3/32" ID tubes also be used as an easy to solder to, filler for small gaps in a motor installation, general gusseting, and lead wire routing.
 
20170823_175316-1.jpg
 
20170823_175350-1.jpg

20170824_165510-1.jpg


  • Tex and tonyp like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#12 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 07 September 2017 - 07:42 PM

CR011 3/32" ID, .400" long, brass pre-cut, gear sleeve
 
$4.50 retail (zip-loc bag of 15 pcs.)

 

These are the perfect length to sleeve Parma (1/8" bore) crown gears, for 3/32" axle.

 

If you use these for that purpose, you have to cut your own set screw passage.

 

Recently, I use these quite a bit for motor installation, as an easy to solder to, brace/gusset.

 

20170907_172054-1.jpg


Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#13 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 07 September 2017 - 08:00 PM

CR012 7/32" OD, 3/16" ID, 1.400" long, brass pre-cut, axle/bearing tube
 
$8.00 retail (zip-loc bag of 10 pcs.)
 
Well worth the 80 cents to assure you have two perfectly square ends, to install your bearings in.

 

Most practical to use with 1" wide brackets.
 
20170907_172125-1.jpg


Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#14 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 07 September 2017 - 08:20 PM

CR013 7/32" OD, 3/16" ID, 1.100" long, brass pre-cut, axle/bearing tube
 
$8.00 retail (zip-loc bag of 10 pcs.)
 
A shorter version of our popular 1.400" precut tube, the shorter length allows the use of axle collars, to keep your gear mesh with inline Retro cars.
 
More practical for 3/4" wide brackets.
 
Again, well worth the 80 cents to assure you have two perfectly square ends, to install your bearings in.

 

20170907_172325-1.jpg


  • tonyp likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#15 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 07 September 2017 - 08:47 PM

CR014 coined steel guide tongue brace
 
.032" spring steel, not quite full hard, just soft enough to be formable/coinable.
 
$15.00 retail (zip-loc bag of 3 pcs.)
 
Super-excellent fit on on all 3 styles of JK retro cars, along with some stamped chassis.
 
20170907_172558-1.jpg

 

20170907_212510-1.jpg
 
 


Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#16 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 07 September 2017 - 09:02 PM

CR015 coined steel gear guard
 
$6.95 retail each (1 per pack)
 
Slot racing's only full coverage gear guard.
 
Solders around the bushing, on the upright.
 
Especially useful on anglewinder rental cars.
 
20170907_172639-1.jpg
 

20170907_212137-1.jpg

 

20170907_212229-1.jpg


  • George Kimber likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#17 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 07 September 2017 - 09:16 PM

CR016 3/32" econo axle ball bearings
 
$4.95 retail (1 pair per pack)

 

Nice quality axle ball bearings

 

Properly cleaned and checked for correct fit on axle.

20170907_172801-1.jpg


Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#18 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 25 November 2017 - 01:05 PM

CR017 FK motor endbell lead wire clips.
 
Eliminates heat, from soldering, on that critical area of the motor.
 
The choice of top racers like Bryan Warmack.
 
Also, great for motor break-in rigs.
 
$8.94 retail (zip-loc bag of 6 pair)
 
20171125_113023-1.jpg

20171125_120054-1.jpg


Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#19 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 30 November 2017 - 02:34 PM

CR018 2MM x 4 FK motor can screws.
 
IMO, the ultimate Retro motor screw.
 
Long enough to work on any common commercial motor bracket, but not too long to need washers.
 
More importantly, a nice deep socket, for ease of use with a ball end wrench, when changing motors, with the gear/axle assembly, in place.
 
Black oxide coating.
 
Uses a 1.5MM wrench.
 
$9.60 retail (zip-loc bag of 24 pieces)
 
20171130_124233-1.jpg
Note, ball end is completely in socket.

20171130_142237-1.jpg
  • Danny Zona and C. J. Bupgoo like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#20 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 30 November 2017 - 03:15 PM

CR019 WXXX Wonder rubber front tire donuts.
 
Super hard, but not noisy, Wonder rubber donuts, to recap, Retro and ISRA front wheels.
 
Approx. .950" OD X .410" ID X .800" wide.
 
Can recap 2 pair of Retro Can-Am or 1 pair of Retro F1, or 1 pair of each, with careful planning and trimming.
 
$16.00 retail (zip-loc bag of 4 pair)
 
 20171130_142042-1.jpg

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#21 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 30 November 2017 - 03:27 PM

CR020 WXXX Wonder rubber front tire donuts.
 
Super hard, but not noisy, Wonder rubber donuts, to recap, Retro and ISRA front wheels.
 
Approx. .950" OD X .410" ID X .385"-4.15" wide. (.800" wide donut, cut approx. in half, with a band saw)
 
Can recap 1 pair of Retro Can-Am, or 1 pair of Retro F1, with precise gluing and trimming.
 
$11.25 retail (zip-loc bag of 5 pair)
 
20171130_142059-1.jpg

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#22 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 14 December 2017 - 12:48 PM

CR001 Cross-Country oil
 
$4.95 retail each
 
This is the synthetic oil that I used to lubricate the JK car when I did the durability/longevity test for JK Products on their Hawk 25 rental motor.
 
What was supposed to be a "quick" test, to confirm the motor would last 5-6 hours, turned into a 232+ hour, maxi-marathon, over 2+ months, rubberbanding a controller, and the car running full speed around Orange lane on my King track.
 
In the final weeks, I was running the car 8 hrs.+, at a time, running it overnight at times, with no stops for lubrication.
 
Finally after 232 1/2 hours of running, one of the brushes, along with the leaf spring it was attached to, wore through, and the car stopped.
 
Using the lap times to conservatively calculate the amount of total laps the car run, it was determined the car ran well over 3400 REAL miles, or literally from coast to coast, Pacific to Atlantic ocean.
 
The axle and motor bushings survived fine, lubricated exclusively by C/R Cross Country oil.
 
To keep the price down, I was able to find an affordable bottle, that also had the nice feature of an attached cap.
 
So you have the triple threat of slot racing oils.
 
The best oil, at the best price, with the best container.
 
post-173-0-23217900-1502500038.jpg

Since I've started selling to Eagle and ERI distributors, this has been a very popular item.
 
For those who missed the saga of the JK rental car that wouldn't die, back in 2012, I came across the Hawk 25 that ran the actual 3,411+ miles.

 

I've opened up this thread for questions about my product line.

 

Note, as I add new items, I may delete your question , and my follow-up, once adequately answered.

20171214_113428-1.jpg

Certainly, some signs of wear, but considering it ran multiple 5-8 hour stretches, without additional relubrication, and the car literally chugged 232.5+ hours, and literally traveled the distance from the Atlantic to Pacific oceans, pretty darn impressive.

20171214_113929-1.jpg

The cause of the eventual permanent demise of the car. Apparently, a DC motor will not run with a mono-brush. LOL


  • Gene/ZR1 likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#23 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 04 January 2018 - 05:42 PM

I've had a request to come out these in a bulk pack, so here it is.

 

CR016-5 3/32" bulk econo axle ball bearings
 
$24.75 retail (5 pair per pack)
 
Nice quality axle ball bearings
 
Properly cleaned and checked for correct fit on axle.
 
20180104_163552-1.jpg


Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#24 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 16 March 2018 - 12:24 PM

This has turned out to be a surprising good item for me.

The superior retention of a nylon nut, but lathe trimmed, to the height of conventional low profile nuts.

I finally got enough trimmed and dyed, to get them out to distributors.

$5.88 retail for a bag of 6.

Of minor note, on the black nuts, the trimmed side is left white.

Alao, on the dyed ones, the dye doesn't take quite as dark/deeply, on that trimmed side.

CR021A - Asst.
CR021BK - Black
CR021BL - Blue
CR021O - Orange
CR021P - Purple
CR021R - Red
CR021W - White

20180314_182549-1.jpg 20180314_182611-1.jpg 20180314_182642-1.jpg 20180314_182655-1.jpg 20180314_182710-1.jpg 20180314_182725-1.jpg 20180314_182739-1.jpg
  • Pat Skeggs likes this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516


#25 MSwiss

MSwiss

    Grand Champion Poster

  • Advertiser
  • PipPipPipPipPipPipPipPip
  • 19,976 posts
  • Joined: 16-April 06
  • Gender:Male

Posted 11 May 2018 - 06:41 PM

CR022 Plated Group F chassis
 
A plated version of the extremely popular and successful C/R Group F chassis.

 

Say goodbye to rust.
 
Will also accept most C Can motors.
 
$29.95 retail each kit (as shown)
 
20180511_182400-1.jpg


  • tonyp, Tim Neja and Jesse Gonzales like this

Mike Swiss
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder

17B West Ogden Ave Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)

Note: Send all USPS packages and mail to: 5858 Chase Ave., Downers Grove, IL 60516






Electric Dreams Online Shop