A cool item and priced right. Only $12 each!
The good news is, I installed some Protrack #400, 3/32" fronts and Protrack #241 rears, and there is approx. .110" clearance in the rear, with a slight taper to the front, so Lucky Bob self-stick .032" lead will fit on the bottom and still leave a fair amount of clearance.
Uses 1/4" OD rear bushings. i.e. Parma #623.
Please note I have a $20 minimum (not including shipping) on all mail orders.
Bent Wrench 3D-printed hardbody chassis
#1
Posted 26 October 2017 - 03:31 PM
Mike Swiss
Inventor of the Low CG guide flag 4/20/18
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder
17B West Ogden Ave., Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)
Note: Send all USPS packages and mail to: 692 Citadel Drive, Westmont, Illinois 60559
#2
Posted 26 October 2017 - 06:33 PM
Are these 4" or 4 -1/2" chassis?
Rick Crutchfield
#3
Posted 26 October 2017 - 07:41 PM
Mike Swiss
Inventor of the Low CG guide flag 4/20/18
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder
17B West Ogden Ave., Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)
Note: Send all USPS packages and mail to: 692 Citadel Drive, Westmont, Illinois 60559