Looking for a source for Hansen rear retro brackets. Any help appreciated. Thanks.
Hansen rear brackets
#1
Posted 07 November 2017 - 06:04 PM
#2
Posted 07 November 2017 - 08:07 PM
Are you going to go to the Fall Brawl?
If so, Tom is attending.
He'll be easy to spot.
He'll be the guy walking around with the pillow, with Howie Ursaner's crown on it.
Mike Swiss
Inventor of the Low CG guide flag 4/20/18
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder
17B West Ogden Ave., Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)
Note: Send all USPS packages and mail to: 692 Citadel Drive, Westmont, Illinois 60559
#3
Posted 07 November 2017 - 08:10 PM
Warmack, he makes a lot of the chassis builder's stuff
Cry like a baby, drive like a girl, walk like a man.
Give me enough rope and I'll build a fast car... or hang myself?
#4
Posted 07 November 2017 - 08:51 PM
#5
Posted 07 November 2017 - 11:24 PM
Available Only through SpeedZone NJ
#6
Posted 08 November 2017 - 10:11 AM
Any pictures of his bracket?
?/?/56-6/12/23
Requiescat in Pace
#7
Posted 08 November 2017 - 04:53 PM
Thanks! Will try to check it out this weekend.
#8
Posted 10 November 2017 - 12:41 AM
Speedzone has both the 3/4 and the 1 .050 non-hypoid, with precision axle bearing holes in stock.
- Tim Neja, JimF and kvanpelt like this
Tom Hansen
Our Gang Racing Team
Cukras Enterprises
Team Camen
Chassis By Hansen
I race and shop at Pacific Slot Car Raceway
#9
Posted 10 November 2017 - 10:03 AM
Inquiring minds want to know: What makes this bracket special/different?
South Carolina, USA
"Assuming either the Left Wing or the Right Wing gained control of the country, it would probably fly around in circles."
- Pat Paulsen, 1968
"I drive way too fast to worry about cholesterol."
- Steven Wright ca. 1983
#10
Posted 10 November 2017 - 11:37 AM
It's FAST!!!
- JimF likes this
#11
Posted 10 November 2017 - 12:14 PM
Hey Tom:
Are those .040 or .050?
#12
Posted 10 November 2017 - 01:06 PM
1.050 wide ?
#13
Posted 10 November 2017 - 01:18 PM
Hey Tom:
Are those .040 or .050?
1.050 wide ?
By the rest of Tom's post, which is light on stuff, like apostrophe's, I would translate it to to being the brackets's are 3/4" and 1" wide, and .050" thick.
In defense of him, he's probably pretty distracted, thrashing, at what appears to be most star-studded, Retro race, ever.
- Tim Neja likes this
Mike Swiss
Inventor of the Low CG guide flag 4/20/18
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder
17B West Ogden Ave., Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)
Note: Send all USPS packages and mail to: 692 Citadel Drive, Westmont, Illinois 60559
#14
Posted 10 November 2017 - 02:44 PM
Thanks Mike....................didn't occur to me that he's probl'y at the FB.
- Tim Neja likes this
#15
Posted 10 November 2017 - 06:14 PM
Mr Swiss is correct, very busy at the Fall Brawl and using my phone to post.
- kvanpelt likes this
Tom Hansen
Our Gang Racing Team
Cukras Enterprises
Team Camen
Chassis By Hansen
I race and shop at Pacific Slot Car Raceway
#16
Posted 10 November 2017 - 06:48 PM
Good to still see those Camen tech blocks.
- S.O. Watt likes this
I intend to live forever! So far, so good.
#17
Posted 14 November 2017 - 11:22 AM
Met the man and got the brackets. Thanks all.