Greg, can you rotate these pictures? I'm not sure why this happened??
'Short Track' NASCAR
Started by
Tim Neja
, Jul 10 2018 12:27 PM
11 replies to this topic
#1
Tim Neja
-
- Subscriber
-
- 6,840 posts Joined: 11-June 07
Grand Champion Poster
- Gender:Male
- Location:Paso Robles
Posted 10 July 2018 - 12:27 PM
Bult a new Short Track car for the new BPR D3 class. These will be fun great handling cars because they can be 3.250" track width!!
Greg, can you rotate these pictures? I'm not sure why this happened??
Greg, can you rotate these pictures? I'm not sure why this happened??
- Jencar17, MSwiss, Tex and 5 others like this
She's real fine, my 409!!!
#2
Cheater
-
- Root Admin
-
- 25,674 posts Joined: 14-February 06
Headmaster of the asylum
- Gender:Male
- Location:Norcross, GA
Posted 10 July 2018 - 12:42 PM
No problem, Tim.
It happens because you're holding your phone wrong for taking pics.
If you're using an iPhone, hold the phone with the long axis horizontal, so that you push the button with your left hand.
Test this and see if I am right.
It happens because you're holding your phone wrong for taking pics.
If you're using an iPhone, hold the phone with the long axis horizontal, so that you push the button with your left hand.
Test this and see if I am right.
- Tim Neja likes this
Gregory Wells
Never forget that first place goes to the racer with the MOST laps, not the racer with the FASTEST lap
#3
MG Brown
-
- Administrator
-
- 7,889 posts Joined: 16-February 06
Grand Champion Poster
- Gender:Male
- Location:The Cumberland Plateau
Posted 10 July 2018 - 02:43 PM
I built one of these not long ago also- but it was to our local rules.
- Jencar17, Tim Neja and C. J. Bupgoo like this
That's thirty minutes away. I'll be there in ten.
#4
Bill from NH
-
- Full Member
-
- 14,740 posts Joined: 02-August 07
Age scrubs away speed!
- Gender:Male
- Location:New Boston, NH
Posted 10 July 2018 - 03:26 PM
MG,
What are your local rules this car was built to? The local home/club group runs a similar hardbody class, but uses H&R, FCR, and brass Pro-Track chassis.
What are your local rules this car was built to? The local home/club group runs a similar hardbody class, but uses H&R, FCR, and brass Pro-Track chassis.
Bill Fernald
I intend to live forever! So far, so good.
I intend to live forever! So far, so good.
#5
MG Brown
-
- Administrator
-
- 7,889 posts Joined: 16-February 06
Grand Champion Poster
- Gender:Male
- Location:The Cumberland Plateau
Posted 10 July 2018 - 03:39 PM
The series information can be found HERE.
We found that H&R and Pro-Track chassis are neither competitive or sturdy enough for the tracks we run on.
We found that H&R and Pro-Track chassis are neither competitive or sturdy enough for the tracks we run on.
That's thirty minutes away. I'll be there in ten.
#6
Bill from NH
-
- Full Member
-
- 14,740 posts Joined: 02-August 07
Age scrubs away speed!
- Gender:Male
- Location:New Boston, NH
Posted 10 July 2018 - 03:55 PM
Thanks for the info. I am somewhat famliar with Brian's chassis. Since the local track is a Tunkel four-lane mini-orange, the chassis I mentioned above works OK for us.
Unfortunately, there hasn't been any NH commercial raceways since 2010.
Unfortunately, there hasn't been any NH commercial raceways since 2010.
Bill Fernald
I intend to live forever! So far, so good.
I intend to live forever! So far, so good.
#7
boxerdog
-
- Full Member
-
- 877 posts Joined: 10-November 10
Race Leader
- Gender:Male
- Location:Modesto, CA
Posted 10 July 2018 - 04:33 PM
I guess great minds think alike. This car is over 10 years old and "used" lightly.
- Tim Neja and C. J. Bupgoo like this
David Cummerow
#8
MattD
-
- Full Member
-
- 3,561 posts Joined: 13-August 11
Posting Leader
- Gender:Male
- Location:IN
Posted 10 July 2018 - 05:28 PM
Nice cars.
We run H&R, Protrack and cut-up Womp chassis and have a lot of fun. We keep motors reasonable, so they match the chassis capability pretty good. We run on a King and at our speeds these all run fine. Not a tight, flat home course.
We run H&R, Protrack and cut-up Womp chassis and have a lot of fun. We keep motors reasonable, so they match the chassis capability pretty good. We run on a King and at our speeds these all run fine. Not a tight, flat home course.
Matt Bishop
#9
Dominator
-
- IRRA National Director
-
- 2,931 posts Joined: 19-September 07
Posting Leader
- Gender:Male
Posted 11 July 2018 - 07:53 AM
Nice looking builds guys.
A motor is only as fast as the chassis it's in.
Dominic Luongo
Like Dominator Custom Chassis on Facebook
NERR photos from 2012-April 2016
NERR photos from 2016 to now
#10
Tim Neja
-
- Subscriber
-
- 6,840 posts Joined: 11-June 07
Grand Champion Poster
- Gender:Male
- Location:Paso Robles
Posted 18 July 2018 - 11:26 PM
I got a chance to try out the new build!! It's really nice and smooth--ran 5.7's on Blue lane so it should be down around 5.3's on Black!! Really FUN class of cars!!
She's real fine, my 409!!!
#11
Beach Oval
-
- Full Member
-
- 25 posts Joined: 17-March 11
Rookie Keyboard Racer
- Gender:Male
- Location:Southampton NY
Posted 22 July 2018 - 06:35 PM
Found this one for sale and had to have it. Builder did great job on body and put on a H&R Chassis.
He built lowered side floating pans that body mounts too which Ready helps in making it handle much better.
He built lowered side floating pans that body mounts too which Ready helps in making it handle much better.
Attached Images
Andy Vogeney
Beach Oval
Beach Oval
#12
Beach Oval
-
- Full Member
-
- 25 posts Joined: 17-March 11
Rookie Keyboard Racer
- Gender:Male
- Location:Southampton NY
Posted 22 July 2018 - 06:43 PM
Pic of chassis.
Attached Images
- cdtanner and Tim Neja like this
Andy Vogeney
Beach Oval
Beach Oval
