Trackside pit box
#1
Posted 03 March 2019 - 08:01 PM
Price $25 ($30 w/ custom name) plus $4.50 First Class shipping.
These are the colors available.
- MG Brown, Maximo, Lou E and 4 others like this
Home of the 2010 USSCA NATS
#2
Posted 03 March 2019 - 08:04 PM
How do I buy?
#4
Posted 08 September 2019 - 06:56 PM
Home of the 2010 USSCA NATS
#5
Posted 09 September 2019 - 07:57 AM
Any chance orange might be available soon?
- Jason Holmes likes this
Bobby Robinson RN, BMTCN
"Nobody rides for free." - Jackson Browne, 1980
"Positivity and optimism can overcome a lot of things." - Tom Brady, 2019
"Trying is the first step towards failure." - Homer Simpson
#6
Posted 09 September 2019 - 11:22 AM
- brnursebmt likes this
Home of the 2010 USSCA NATS
#7
Posted 09 September 2019 - 12:39 PM
Home of the 2010 USSCA NATS
#8
Posted 09 September 2019 - 02:42 PM
#9
Posted 09 September 2019 - 10:34 PM
I will be using my Irish Green one at the Sano.
Thanks Chad.
Larry D. Kelley, MA
retired raceway owner... Raceworld/Ramcat Raceways
racing around Chicago-land
Diode/Omni repair specialist
USRA 2023 member # 2322
IRRA,/Sano/R4 veteran, Flat track racer/MFTS
Host 2006 Formula 2000 & ISRA/USA Nats
Great Lakes Slot Car Club (1/32) member
65+ year pin Racing rail/slot cars in America
#10
Posted 10 September 2019 - 05:35 PM
Good to hear from you. Good Luck!!!!!
Home of the 2010 USSCA NATS
#11
Posted 17 September 2019 - 02:35 PM
I need a translucent green and orange one for sure. Any in purple? Can you show a picture of Candy Apple?
Matt Sheldon
Owner - Duffy's SlotCar Raceway (Evans, CO)
#12
Posted 17 September 2019 - 05:08 PM
I would like a Candy Apple one please custom , Bad Dog Racing
Kevin Myhaver
Bad Dog Racing
Color Me Gone
Romans 1:16 "... for I am not ashamed of the Gospel"
#13
Posted 17 September 2019 - 10:19 PM
orange for me also
thanks jason
#14
Posted 18 September 2019 - 08:20 AM
Sent from my iPhone using Tapatalk
#15
Posted 18 September 2019 - 11:17 AM
I would like a white one with , Perry Walters Racing please ?
- Bradford Racing likes this
#18
Posted 25 September 2019 - 09:10 AM
A big thanks goes out to Chad Langlois for making my trigger and handle 3D prints for me. It turns out he lives only about 6 miles away and contacted me to see if I needed any prototypes made, all free of charge. It has made the process much easier and faster for me. Thanks Chad!
- team burrito, tonyp, Jason Holmes and 2 others like this
Jim Difalco
Difalco Design
3075 NE Loquat Lane
Jensen Beach, FL 34957
(772) 334-1987
askjim@difalcoonline.com
#19
Posted 25 September 2019 - 05:06 PM
Your welcome anytime.
Home of the 2010 USSCA NATS
#20
Posted 28 September 2019 - 12:44 PM
#21
Posted 29 September 2019 - 08:30 PM
Your welcome. Thank you for your business.
Home of the 2010 USSCA NATS
#22
Posted 30 September 2019 - 09:34 AM
HI Chad:
Awesome design, but how about adding a few (2 or 4) small slots to your design (similar to the picture below) so that braid could be pushed clip side down into them?
Always nice to have a pair or two of fresh braid handy during a race.
- Half Fast, Barry, Matt Sheldon and 2 others like this
Jay Guard
IRRA Board of Directors (2022-Present),
Gator Region Retro Racing Director (2021-Present)
SERRA Co-Director (2009-2013)
IRRA BoD advisor (2007-2010)
Team Slick 7 member (1998-2001)
Way too serious Retro racer
#23
Posted 30 September 2019 - 04:28 PM
Good idea. When i get caught up i will look into that.
- MG Brown likes this
Home of the 2010 USSCA NATS
#24
Posted 30 September 2019 - 05:56 PM
Sent from my iPhone using Tapatalk
- Barry likes this
Anthony 'Tonyp' Przybylowicz
5/28/50-12/20/21
Requiescat in Pace
#25
Posted 30 September 2019 - 06:06 PM
HI Chad:
Awesome design, but how about adding a few (2 or 4) small slots to your design (similar to the picture below) so that braid could be pushed clip side down into them?
Always nice to have a pair or two of fresh braid handy during a race.
-173-0-3176z0100-1569854709.jpg
I agree!
Rotor
"Kinky Kar"