Daytona 500 & 350 races - Jun 21-22, Greenville, TN
#1
Posted 14 May 2019 - 08:30 AM
- Chris Carter likes this
Jeff Chalmers
#2
Posted 15 May 2019 - 12:32 PM
Daytona 500 & 350 rules
BODY
Revell SnapTite Max 1/24 2016 Chevy SS or 2015 Ford Fusion models.
NO aterations to the body, no sanding or trimming!
Body height minimum 1-7/8" with car sitting on tech block.
Must have rear and front plastic windows from original kit! NO Lexan!
Car must weigh minimum 190 grams.
Must have 3 numbers and 3 sponsors.
INTERIOR
Any plastic 3D interior allowed.
No paper interiors allowed.
CHASSIS
Pro Track chassis #612 and #612S.
NO chassis alteration allowed.
Guide must not be visible when looking down at car.
ONLY 48 pitch gears allowed.
ONLY 1/8" rear axles.
Front axles 1/8" or 3/32" allowed.
Independent front wheels allowed.
Axles bearings and bushings allowed.
Must have 1/16" clearance at the front and rear of chassis between chassis and tech block.
NO car dragging!
TIRES
Pro Track 319 front, 320 rear. Any color hub allowed.
Tires CANNOT be trimmed, narrowed, or trued!
Tires must NOT stick out past the body!
HAND-OUT MOTORS
JK Hawk 25 motors are to be purchased at the track. $10 each (limit 2 motors per racer).
Entry fee $40 (does not include motor).
IF IT IS NOT MENTIONED, IT IS NOT LEGAL!
- MSwiss and Chris Carter like this
Rick Crutchfield
#4
Posted 20 May 2019 - 09:41 AM
ONLY 33 days till the 500 & 350 races! Make plans to be there!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Rick Crutchfield
#5
Posted 20 May 2019 - 10:12 PM
any deals on hotels for the out of town guys??
#6
Posted 21 May 2019 - 12:23 PM
- Chris Carter likes this
Jeff Chalmers
#7
Posted 04 June 2019 - 06:55 AM
- Chris Carter likes this
Jeff Chalmers
#8
Posted 24 June 2019 - 09:48 AM
I WON THE DAYTONA 500 ..I WON THE DAYTONA 500 !!
Thanks Jeff and all the sponsors !!