24 replies to this topic

[bbr]

Another new controller:

 

[bbr]

DenVel electronics
 
A lot of pushing buttons to do settings.

[Racer36]

900 bucks and I will still be in the B Main...

[Bill from NH]

The YouTube video isn't in English, so for me, would be a waste of 14 minutes watching it. If they reduced the price 89 cents, they could call it the "888".

[Rob Voska]

Richard Mack, the chassis guy, has one.

[Roger Schmitt]

Dale Lipe loves his.
 
Available HERE.

[ASR Sergeev]

 Hello, our controllers have no analogues in the world, the non-contact trigger allows you to adjust the trigger, the stroke length of the trigger, all the same, more than 100 speeds are saved, the double brake mode allows you to configure it, for example, on lines with a hard brake, and in turns (snakes) ) with a softer brake, also if your motor is very slow to brake, you can adjust the dock, which allows you to make even a hard motor, soft. 3 brake modes, regression, progress and fixed. The memory of the controller allows you to no longer remember what settings you previously traveled to, just turned on the desired cell and the controller you have configured. Having learned how to configure it, you will no longer want to ride a simple transistor controller, (I checked it on myself). By pulling the trigger you will not feel it rubbing on the board and this is a separate pleasure. The controller can be reflashed to your needs, you can write in the cells those model classes that you need. Now we have increased the speed of data transfer from the pen to the block, which has helped to increase the model’s response to trigger pull, compared to the transistor controller, ours has almost no voltage loss, it is 0,000 .... some thousandths.

An example of me, earlier at the ISRA World Cup I didn’t even get to the semifinals, at the World Cup in Finland, I went to our controller and in almost all classes I got to the semifinals, other racers became interested in my progress and filed a protest against my controller They opened it, checked for legality and allowed to go further, since it completely followed the rules, and the battery inside the controller fed only the controller screen and did not raise the voltage on the track, in theory, you can completely disconnect the battery and the controller will still work amb, minus this is just what you advance will not be able to include the desired setting mode, you will have to wait to be included track power.

[ASR Sergeev]

I can’t figure out how to attach a PDF file, please tell me

[TedKramer]

Hello Andrey,

 

driving slotcars with your controller is a real pleasure. I 've got one from Andrei Zhbanov. I love it. I've tested it with Hawk 7, Phoenix, S16D, G12 and Eurosport 24. No Chips to change, no open circuit boards that looks like controller prototype. I 've compared it with my transistor controller. Best time was both nearly the same, but with the EVO 1 it was easier to drive continuously faster. The feeling is more like driving a Porsche not only a car with horse power.

 

Thanks a lot for this great contoller.

[Roger Schmitt]

these exceptional controllers are once again available from Mid America raceway

 

 

 

[bbr]

TTB, orange wire / green box

[Roger Schmitt]

right side controller is  sold

[ASR Sergeev]

I am very glad that our controllers are already used in many countries and we hear positive reviews, this tells us that we are on the right track and we will continue to improve it, in the future when the limit of improvement is found, we will make a connector for updating, flashing the controller, you can future connect it to your computer and update. There is an idea to make the controller universal, and use it in a slot simulator game, as is done in RC, if there is anyone who can write game simulators, we are open for discussion.

[ASR Sergeev]

How to upload to the forum PDF instructions

[ASR Sergeev]

[Вложение = 187710: EVO-1_users_manual_eng.pdf]

Attached Files

•  EVO-1_users_manual_eng.pdf   965.86KB   466 downloads

[Phil Beukema]

This looks awesome.

 

Is there a video in English? My French is fine also.

[ASR Sergeev]

Unfortunately there is no video in English, the creator is Russian-speaking, cannot speak English, but in the video on the YouTube channel, you can turn on subtitles and there will be an English translation.

[Phil Beukema]

Thank You

[bbr]

The pdf manual is very clear. The arrangement of functions works like a charm.

Can't wait to try the regressive brake feature (adjustable). The synopsis controller has something the same which I like.

 

Build quality A+++

 

(don't tell my GF that I spent $$$ on this, LOL. She won't let me buy a McLaren 765, so I bought the Evo1... ha ha)

 

[Phil Beukema]

Mike,

I'm looking forward to review after you get it all dialed in.

[ASR Sergeev]

New oming soon, EVO PWM controller

 

[F1fletch]

Andrey, your killing us with all this beautiful tech!!!!

I feel my wallet not just getting lighter but floating away...Hahahaha!

So I take it the EVO1 is a transistor Controller and this new one is all PWM?

[Alchemist]

Gorgeous looking controller Andrey!

 

With your technology being so good attractive, I presume one must be so disciplined as to NOT keep looking at the controller when driving your car! LOL

 

Very very nice Andrey - thank you for teasing/sharing it with us!  LOL

 

Ernie

[F1fletch]

Testing is beginning, teaser video here.

 

https://www.facebook...13335065507694/

[BrettC]

Any news on the PWM controllers?