Can someone please tell me where the brake connection is on the frame (resistor)? Or better still, a photo of it.
JK controller
#2
Posted 23 July 2020 - 09:30 PM
Follow where the red brake wire ends up and that will give you your answer.
Jim Difalco
Difalco Design
3075 NE Loquat Lane
Jensen Beach, FL 34957
(772) 334-1987
askjim@difalcoonline.com
#3
Posted 24 July 2020 - 01:21 AM
it's the end contact when you release the trigger.
First Place Loser in the JK Products
International D3 Builders Competition
#5
Posted 25 July 2020 - 04:09 AM
?? This looks like a good entry point controller Tim.. Didn't know you guys manufactured controllers. I'm opening a raceway soon and will be looking at doing starter packs with car and controller like Parma used to do.
#6
Posted 25 July 2020 - 10:49 AM
Thanx Guys for the info.
Not easy to see if it's the same connection as the full contact.
#7
Posted 25 July 2020 - 09:53 PM
The wide end contact is always the right place. It is isolated from the resistor coil.
Larry D. Kelley, MA
retired raceway owner... Raceworld/Ramcat Raceways
racing around Chicago-land
Diode/Omni repair specialist
USRA 2023 member # 2322
IRRA,/Sano/R4 veteran, Flat track racer/MFTS
Host 2006 Formula 2000 & ISRA/USA Nats
Great Lakes Slot Car Club (1/32) member
65+ year pin Racing rail/slot cars in America