Group F chassis and body?
#1
Posted 28 October 2020 - 04:23 PM
#2
Posted 29 October 2020 - 06:43 PM
#3
Posted 29 October 2020 - 06:47 PM
#4
Posted 29 October 2020 - 09:09 PM
Try a narrow koford boxstock chassis with the red fox tri-tech body. I havent raced on that track since 2007, but I would think that something similar to Port Jeff would work just fine on that track.
Five-time USRA Champion
TEAM KOFORD
#5
Posted 30 October 2020 - 09:52 AM
Either of these Koford chassis will work KM746A (new style) or KM530O (old style), they are about 4.100 long, you don't need short narrow chassis, they can be twitchy coming out of the donut
Depending on who does your bodies, I'm using a Red Fox Tock with a rib in .005
I run on the G16 at PA Watson's Slot Car Raceway in Houston and this combo is almost full punch on every lane with a Hawk 7 or ProSlot 4002 FK running 2.8s to 3.0s depending on how good the motor is.