Events for September 22, 2012

The race of the new IRRL season will be on Saturday, Sept. 22.

It will be two weeks before the Sano, so it will be an ideal warm-up.

Raceway opens at 8 AM.

F1 tech starts at 9:30 AM.

Can-Am will follow F1.

Chicagoland Raceway
2253 Maple Ave.
Downers Grove, IL 60515
(708) 203-8003

Come on out for a fun day of GRRR Retro racing on the east coast.

All classes will follow IRRA™ rules.

Doors open at 9 AM.

GT Coupe Tech Opens - 10:15 AM.

11 AM - GT Coupe on 145' Ogilvie Hillclimb
Lunch
1 PM - Stock Car on the 65' Ogilvie "Phoenix" oval
3 PM - Can-Am on the Hillclimb

The Raceway.biz, Melbourne, Florida.

http://slotshotsrace.../Home_Page.html

4th Annual King of the Hill
October 26, 27 and 28th (if needed)

Friday Oct 26th 2012:
Open at 12 noon. Racing at 6pm.
.890 and .990 index will be run on pro tree
1.090, 1.190, 1.290 index will be run on full tree
entry fees are $4 per index class, 80% payback, no light money, no buybacks
Rail Bracket race is open to all rail dragsters, slingshots, wedge rails and open cockpit center steer roadsters. $4 entry, 80% payback, $1 light and $1 buybacks
No Bar Challenge bracket is just that. Any door car without wheelie bars. No rails, center steer roadsters. $4 entry, 80% payback, $1 light and $1 buybacks.
Pro Styrene: $5 entry, $1 buybacks, 90% payback. Race will be run heads up, pro tree. No qualifying. 4 car limit, double entry allowed. Rules below:

These rules are from MSSA and this class will be run at different tracks over the winter.
Body:
Must use a vacumm formed sytrene Pro Stock car or truck body available from JDS, WRP, Showtime, Straightlines or any other manufacturer available through your store's distributor.
Body must have a forward facing scoop and rear wing. Wing must have spill plates, no larger than 5/16". Wing must be as wide as the decklid at the mounting point and protrude at least 1/4" from rear of the body. Wing can be no longer than 7/8", measured from the furthest protruding part of the decklid.
Rear bumper must be intact with the execption of clearance for wheelie bars.
No venting allowed to rear of body
All windows must be cut out, no painted windows
Wheel opening must be cut out
Must have a full 3-D interior

Chassis:
WRP Stainless or Brass Inline (WRP C06, C10, RW01, RW02 or RW03)
.082 Stainless tubing main rails, any size tubing/wire for wheelie bar supports. FOR SLOT SHOTS, I AM ALLOWING .072 Stainless or .082!!!!
3/32 axle and axle bushings. No bearings
5" Maximum length between rear wheels axle centerline and wheelie wheel axle centerline
NO OVER SIZE GUIDE FLAGS.

Rear tires: Must run scale hubs
1 1/16" minimum height; .500 Minimum width

Front Wheels:
Must run Scale front wheels in upright position, cannot be angled

Gearing:
16Tooth pinion 64 pitch
46 Tooth crown 64pitch

Motor: Must run a stock Falcon 7, Hawk 7 or TSR 7. NO MODS!

Weight: Minimum 100 grams
Tree: .200 Pro Tree
Tech director has final say on all rules

Saturday, October 27, 2012
Open at 8am. Racing at 11am. Entries in by 1030
$5 entry, 25 entry limit, double entry allowed. $1 light, $2 buybacks, 90% payback. If light money in Round 1 is taken by a perfect (.0000) light, half of the buyback money will go to the 1st round light money winner.