Events for February 15, 2014

 

Monthly LMP/GT - GT12 - Eurosport Racing at The Cave Raceway

The Cave Raceway will holding a monthly LMP/GT12/Eurosport racing program the third SATURDAY of each month.
 
LMP/GT followed by GT12 followed by a Eurosport class to be rotated each month. USRA rules.

The doors will open at 8 AM, with the first race at 10:30 AM.

Fees for races are:
$12 per class for non-members
$10 per class for club members

There will be no pit fees or practice fees at any race. This is included in the race entry fee.

For futher info please go to The Cave's WEBSITE.

This race is for anyone that enjoys these classes; you need not be a member. Again please forward this information to anyone that you feel would enjoy this track.

The Cave Raceway
22345 E. La Palma Ave., Unit 107
Yorba Linda, CA 92887
(714) 412-4333

R4/7 Warm-Up Race
 
For further info on the R4/8 race at Tom Thumb Hobbies in Columbus, OH, as it becomes available, please keep an eye on this FORUM.
 
Tom Thumb Hobbies
460 N Wilson Rd
Columbus, OH 43204
(614) 274-5150

East Coast Custom Cars 150
 
The Reality Mod Tour will hold Race #5 of 6 at Beach Oval in Southampton, NY, on February 15, 2014.
 
$20 entry fee, top three pay-out. 50-50 raffle, foor and drink provided.
 
Reality Mod Tour Rules apply.
 
Six-lane 10x20 tri-oval.
 
Eight cars in Main Event running a 25 lap per lane in a Championship round-robin lap format.
All Mods will qualify for time to seed heat races. Heat races will follow with winners advancing to Main.
A Consi will follow Heat Races to determine who advances to main.
 
Super Modified race to follow.
 
Reality Modified Tour Rules updated 01/11/14
   
#1. Body
Approved asphalt type modified body. Bodies made by Reality Raceway (Tour Only). No modifcations. All cars must have a drivers head and air cleaner. It is intended that these cars look as realilistic as possible. All new bodies will come through with windshields and rear panels which must remain. Rear panels on mods required.

ONLY controller allowed in drivers area during races. Straight wired controllers only. No electronic devices between track and controller handle.

#2. Chassis
Parma #577 only. Chassis must be cut to pattern. Pattern can be supplied.
MUST BE APPROVED. NO paint or tape on chassis bottom that interfers with chassis gauge.
Wheelbase 4"+/ - 1/8".
Front wheels may spin independently. Must have solid steel axles front and rear. Minimum axle diameter - 1/8 ".
Axle holes may be slotted. Bushings may be filed.
All cars must have rear bumpers made from 1/8 - 3/16 " channel, square, or rectangular brass only. Rear bumper Minimum height. 3/8".
All cars must have side bars 1/16 " diameter max, brass only. Max. width of bars is 3-1/4 ". Tolerence is +/ - 1/16.
All bars must be approved.
No other chassis modifications.
No drilling or lightening of chassis. Weight may be added.
Chassis clearance is .047" min.   

#3. Spacers
The ONLY SPACERS that will be used are the the following Sonic spacers in their respective locations. No alterations.
Left front - one .062" (optional) Sonic spacer, part # SON-062
Right front - one .160" Sonic spacer, part # SON-.160  
Right rear - two .160" Sonic spacers, part # SON-.160
Left rear - one .160" Sonic spacer, part # SON-.160
    
#4. Tires
Alltires: Pro-Trac Daytona Stockers ONLY.  Nail polish allowed.
Chassis clearance is .047" min. Tour Rule. Checked at Track Chassis height station. All four tires will touch chassis gauge.
All front tires must touch track.
Front and rear tires: maximum width is .800", minimum width is .700".
Minimum diameter is .750: measured inside & outside.
Maximum diameter is .880".
 
# 5. Motors
The motors allowed in these cars will be the Falcon 7, JK Hawk 7, Demon, Trinity Evil 9 designed after the Falcon 7. Heatsink may be added. No modifications. NO GEAR RULE  11/13 - 2014???