a car by John Reimels:
Posted 29 November 2016 - 05:34 PM
Nicely done Mike! Very cool.
Posted 29 November 2016 - 07:01 PM
VERY NICE design and build
!
Don Weaver
A slot car racer who never grew up!
The supply of government exceeds demand.
L.H. Lapham
If the brain-eating amoeba invades Washington
it will starve to death...
Posted 29 November 2016 - 07:24 PM
So now you don't need the little resistor thingies before the motor?
Posted 29 November 2016 - 08:02 PM
John was very instrumental in getting retro racing started in New England. John & his son Jonathan used to have, maybe still does, one of the mini coupe race cars.,
Posted 30 November 2016 - 08:25 PM
fantastic workmanship !
Posted 23 December 2016 - 12:41 PM
We had a nice test night @ Genn Gordon's last Saturday. John sent Russ Upton a car just like the one pictured. Glenn drove it and it ran as good as it looked.
Posted 09 June 2018 - 06:40 PM
Posted 24 July 2018 - 07:37 PM
china
Posted 24 July 2018 - 10:30 PM
Lucky Bobs Raceway 414 327 4003
or on Ebay from LANDSHARK
Also a tricked out version with NEO magnets, not for more power but more brakes.
Posted 25 July 2018 - 09:44 AM
John,
Highest of kudos for the excellent workmanship! I am an admirer!
The neo magnets would make these gravity cars the most fun to drive!
Car Model magazine featured an angle-winder build back when I was a kid and I was hooked into scratch-building these.
The Nats are going to be in Denver next summer - I hope to meet you again if you are coming.
AJ
Sorry about the nerf. "Sorry? Sorry? There's no apologizing in slot car racing!"
Besides, where would I even begin? I should probably start with my wife ...
"I don't often get very many "fast laps" but I very often get many laps quickly." ™
The only thing I know about slot cars is if I had a good time when I leave the building! I can count the times I didn't on one two three hands!
Former Home Track - Slot Car Speedway and Hobbies, Longmont, CO (now at Duffy's Raceway), Noteworthy for the 155' Hillclimb track featuring the THUNDER-DONUT - "Two men enter; one man leaves!"
Posted 16 September 2018 - 04:39 PM
Any out there with neo mags and carbon brushes ?