Indy Car Rules
- Bodies - Monogram 1/24th Indy Car bodies will be utilized.
- Chassis – H&R.
- Tires, Wheels Axles; ProTrack Daytona (for NASCARs) or H&R
- Height of the axle hangers may not be modified
- Rear Tires may be cut down so that ground clearance is a minimum of .055 inches
- Rear Tires may be narrowed
- Rear Track maximum of 3.55”
- Front tires may be cut down so that ground clearance is a minimum of .055 inches
- Front Track 3.18”
- Wheelbase is approximately 4-7/8”
- Motors – The stock blue H&R 40K power plant will be used
- Gearing- Any ratio may be used (I used 7/34)
- Chassis may not be modified for movement of front or rear end. No floating front or rear axles
- Custom brass side pans are allowed up to three quarters of an inch wide. They may protrude slightly from the body but must adhere to the shape of the body.
Updated 11/19/21
