Jump to content




Photo

Captain Rick's 1st Race Sports Car


  • Please log in to reply
70 replies to this topic

#1 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 16 November 2014 - 10:19 PM

I've started building a racer "inspired" not only by Mike Steube's race winner but also by a chassis by Tony P and a motor advertisement by Certus.

 

Here's the link to the race report:

 

1st 1969 MCS/USRA Road Race - Sports Car

 

 

This car will be very different from my 5th race McLaren. I really like this race series. The different types of cars raced as the Pro slot car evolved during the 6 month series offers many building possibilities.

 

Here’s Mikes winning car:

 

1969MCSA-MotorSportsCar-4-1.jpg

 

It’s a motor box car with all brass rails, a 1” wide drop arm and the plumber mounted not on the drop arm but on the main rails:

 

1969MCSA-MotorSportsCar-3.jpg

 

I also like this Tony P chassis from his construction article in the January 1969 Car Model Magazine. Sooooo…….not being shackled by building a “clone” I’m going to have some fun picking and choosing the features I like best from the period publications and build a car:

 

CM1-69pg2.jpg

 

I need to start with the motor box but………I HATE MOTOR BOXES!!!!!!!!

I use yards of wire before I get one bent “korrectly”. Tony P’s article uses a simple and effective 2-piece motor box design that I really like and it’s easy to make.

 

Even easier for me is to use the one piece motor box made for me by my good friend Steve Okeefe who took pity on my plight:

 

1969MCSA-MotorSportsCar-4.jpg

 

Here’s everything needed set up in my Rick’s jig ready to solder:

 

1969MCSA-MotorSportsCar-5.jpg

 

The finished motor box rear end:

 

1969MCSA-MotorSportsCar-1.jpg

 

1969MCSA-MotorSportsCar-7.jpg

 

Time for the main rails next………. :dance3:


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...





#2 Pablo

Pablo

    Builder

  • Administrator
  • PipPipPipPipPipPipPipPip
  • 18,437 posts
  • Joined: 20-February 06
  • Gender:Male
  • Location:Cleveland, Tennessee

Posted 17 November 2014 - 01:48 AM

:heart: :good:

Looks like Mike's was a left side can drive and Tony's is obviously right side EB drive, so if you hate to do motor boxes, why go with the EB drive ?  (not a critique, just a question....)

 

Will you use .063 pan hinge tubes, or .094 ?


Paul Wolcott


#3 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 17 November 2014 - 11:32 AM

Hi Pablo,

 

I wanted to show the evolution of chassis design in this short 6 month series so a motor box was a must. If I hadn't had Steve O's pre-bent motor box I'd have used Tony P's 2-piece design.

 

A motor box works for both endbell or can drive and this car will be endbell drive. The motor can I'll be using isn't even drilled for mounting screws.

 

Since I'm not "cloning" I can pick and choose design elements used in the series.   :dance3:   I'm going to use Mike's .062" hinge tubes.


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#4 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 17 November 2014 - 12:16 PM

Here are some more pictures of cars in the first race. I thought I'd get them in one place for my build:

 

MCSMay69-3.jpg

 

MCSMay69-1.jpg

 

MCSMay69-4.jpg

 

 


  • endbelldrive and Mike K like this

Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#5 endbelldrive

endbelldrive

    Checkered Flag in Hand

  • Member at Peace
  • PipPipPipPipPipPip
  • 1,740 posts
  • Joined: 16-February 06
  • Gender:Male
  • Location:Witless Protection Program

Posted 17 November 2014 - 03:15 PM

These cars were/are so beautiful!  Lots of brass with .032 pan hinges...Ferrari 612 and Lola T-160 bodies with crisply detailed interiors...monster horsepower with solid endbells...the list goes on! :wub:


Bob Suzuki
8/19/54-8/?/21
Requiescat in Pace

#6 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 17 November 2014 - 05:21 PM

I couldn't agree more Bob! :good:


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#7 Pablo

Pablo

    Builder

  • Administrator
  • PipPipPipPipPipPipPipPip
  • 18,437 posts
  • Joined: 20-February 06
  • Gender:Male
  • Location:Cleveland, Tennessee

Posted 17 November 2014 - 08:47 PM

Thanks for the answers, Rick, it all makes sense. :good:


Paul Wolcott


#8 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 20 November 2014 - 07:48 PM

In the past when making a chassis, I've cut and bent the pieces one at a time and soldered them in place. This is a fun way for me to build but it's slow and I'm bathed in acid flux for hours.

 

I've decided to cut and fit all the center section parts first. Then solder up all the chassis rails and other pieces for the entire center section in one shot.

 

Here, all the rails are jigged up and ready:

 

1969MCSA-MotorSportsCar-19.jpg

 

Next all the "cross pieces" were cut and jigged up:

 

1969MCSA-MotorSportsCar-3-1.jpg

 

I started at the rear clamping things in place:

 

1969MCSA-MotorSportsCar-2-1.jpg

 

All soldered up and ready for cleanup:

 

1969MCSA-MotorSportsCar-20.jpg

 

I love my Rick's Jig!


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#9 SlotStox#53

SlotStox#53

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 4,084 posts
  • Joined: 13-March 13
  • Gender:Male
  • Location:TX

Posted 20 November 2014 - 08:42 PM

Another 1969 car Rick.... :D :dance3:   Excellent choice & progress so far :good: 

 

The change in routine certainly seems to of made the speed of the build a lot quicker...



#10 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 20 November 2014 - 10:51 PM

Hi Paul,

 

I think this is working out better. I can work on making all the rails and things without worrying about all the acid flux. Then when everything is made......let her rip.

 

I posted the previous post of the soldered up center section 3 hours ago. I've spent that time trimming, deburring and putting the buff to it. I think it was 3 hours well spent.

 

I'm pooped and it's time for dinner......pics tomorrow......... :)


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#11 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 22 November 2014 - 06:22 PM

Here's the center section "buffed up" and with the extra crap-O-la cut off:

 

1969MCSA-MotorSportsCar-26.jpg

 

1969MCSA-MotorSportsCar-24.jpg

 

1969MCSA-MotorSportsCar-22.jpg

 

I really lucked out with the joint of the 4 inner rails at the center of the cross piece. Almost can't see it:

 

1969MCSA-MotorSportsCar-27.jpg

 

One thing I forgot to solder on in the first go round were the plumber rail "up-stops". I do them and the drop arm pivot tubes in one piece and then cut the center out. Less fiddling around with little separate pieces:

 

1969MCSA-MotorSportsCar-23.jpg

 

The center cut out:

 

1969MCSA-MotorSportsCar-21.jpg

 

The drop arm is relieved at each end to stop the solder from flowing and locking the whole thing up (I hope!):

 

1969MCSA-MotorSportsCar-25.jpg

 

Time to solder up the drop arm and see if my little "reliefs" worked.  :unknw: :crazy:


  • Jairus and endbelldrive like this

Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#12 Jairus

Jairus

    Body Painter Extraordinaire

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 10,174 posts
  • Joined: 16-February 06
  • Gender:Male
  • Location:Salem, OR

Posted 22 November 2014 - 07:05 PM

Hope you are keeping good high resolution pictures for a later article Rick. Because this is pretty, very pretty!


Jairus H Watson - Artist
Need something painted, soldered, carved, or killed? - jairuswtsn@aol.com

www.slotcarsmag.com

www.jairuswatson.net
http://www.ratholecustoms.com
Check out some of the cool stuff on my Fotki!


#13 Bill from NH

Bill from NH

    Age scrubs away speed!

  • Full Member
  • PipPipPipPipPipPipPipPip
  • 14,700 posts
  • Joined: 02-August 07
  • Gender:Male
  • Location:New Boston, NH

Posted 22 November 2014 - 07:56 PM

Rick, your "reliefs" ought to work fine. How deep are they, about .015-.020?  Another means they use to prevent droparm hinge 'lock-up' was to cut off the back corners of the droparm at 45 degrees.


Bill Fernald
 
I intend to live forever!  So far, so good.  :laugh2:  :laugh2: 

#14 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 22 November 2014 - 09:52 PM

Thanks Jairus.  Yes, my photos are 300 dpi, about 2600 X 2000 pixles and about 800 KB.

 

You got it Bill, .015"+ deep. :good:

 

Cutting the corners at 45 degrees seems to possibly be a little less common in the cars of this race but would have been not only appropriate but easier to do. 

 

This drop arm was rescued from a junk chassis and refurbished as best as I could. Here's the finished drop arm waiting for a big hunk of lead like the cars in the race........

 

1969MCSA-MotorSportsCar-28.jpg

 

1969MCSA-MotorSportsCar-22-1.jpg

 

Plumber and pans are next.........

 


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#15 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 28 November 2014 - 04:17 PM

For the pans I was going to use these Team Nutley stocker pans and shorten them up:

 

1969MCSA-MotorSportsCar-31.jpg

 

Problem is they are really thick material and these early chassis designs seem to NOT notch out the pans for the hinge tubes. Instead they merely mount them on TOP of the pans.

 

I decided to make my own copies of the Nutley pans out of .030” K&S brass using Mr. Band Saw and Mr. Milling Machine:

 

1969MCSA-MotorSportsCar-33.jpg

 

The plumber rails seem to be 2-piece in this time period. An L-shaped piece soldered on top of the plumber rail itself:

 

1969MCSA-MotorSportsCar-35.jpg

 

Rather than just lop the corner of the pan off I tried to inlet it like Steube did:

 

1969MCSA-MotorSportsCar-39.jpg

 

Soldering the hinge tubes on top of the pans could be trouble…….solder flowing and fastening the tube to the pans as well as the plumber rail. I’ve had good luck using high temperature Kapton tape to keep solder flow off the pans:

 

1969MCSA-MotorSportsCar-40.jpg

 

It worked and the plumber rails are ready to install on the center section:

 

1969MCSA-MotorSportsCar-37.jpg

 

1969MCSA-MotorSportsCar-36.jpg

 

Getting close to a finished chassis and motor building time………. :D


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#16 SlotStox#53

SlotStox#53

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 4,084 posts
  • Joined: 13-March 13
  • Gender:Male
  • Location:TX

Posted 28 November 2014 - 04:50 PM

Beautiful! Love the look of these earlier cars/technology with the position of the plumber & multiple rails , real contrast to your 5th race stunner ! :D

#17 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 28 November 2014 - 07:33 PM

Thanks Paul. As you point out, there is a real evolution going on in this series short time frame  between the first race and the last:

 

Motor box chassis VS. "half rail" chassis.

 

4+ rails per side of mostly if not all brass VS. 2 piano wire rails.

 

1" wide solid drop arms with Cox or Dynamic Lo Pro guides VS. 1 1/4" wide cut out drop arms with JET flags.

 

Solid pans with the hinge tube soldered on top VS. cut out pans with the hinge area notched out.

 

Plumber pivot on the main rails VS. on the drop arm.

 

16D motors both endbell and can drive VS. can drive Lo-Profile motors such as the Mura B and what would become the Green Can, a cut down Mura 16D can to fit Champion magnets. The endbell drive Champion 16D was still hanging on but its days were numbered.

 

Many different body styles within 4 different classes of cars (Sports, GT, Stocker and GP) VS. a field full of McLaren M8's that followed.

 

For a builder, this is heaven!  :dance3:


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#18 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 30 November 2014 - 04:10 PM

The center section set up and clamped down in my Rick's Jig. A combination square makes sure my extra long pan hinges are straight:

 

1969MCSA-MotorSportsCar-48.jpg

 

Once the hinge wire is soldered to the pan, the long pin tube is soldered to it out on the end. Then touch the iron tip to the wire and pin tube, not the pan. Drag the iron and any excess solder off to the end of the pin tube:

 

1969MCSA-MotorSportsCar-38.jpg

 

Here it is finished up:

 

1969MCSA-MotorSportsCar-34.jpg

 

These "fancy lad" pliers help to bend up the pan down stops:

 

1969MCSA-MotorSportsCar-30.jpg

 

The stop soldered in place toward the outside of the pans:

 

1969MCSA-MotorSportsCar-49.jpg

 

I ended up using ideas from several of the cars in the race:

 

1969MCSA-MotorSportsCar-53.jpg

 

I used Steube's style of pan in-letting around the angled plumber and outside main rail. John Anderson's use of a 1" Cobra drop arm and Phil Rubin's main rail layout and front axle mount style:

 

1969MCSA-MotorSportsCar-51.jpg

 

Well, the chassis is almost finished. I just need to add the wing mount........

 

1969MCSA-MotorSportsCar-54.jpg

 

"Wing mount"!?!?   :shok:  :crazy: :dance3:


  • endbelldrive and Gator Bob like this

Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#19 Jairus

Jairus

    Body Painter Extraordinaire

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 10,174 posts
  • Joined: 16-February 06
  • Gender:Male
  • Location:Salem, OR

Posted 30 November 2014 - 04:31 PM

Yup, it's a McLaren afterall! :dance3:


Jairus H Watson - Artist
Need something painted, soldered, carved, or killed? - jairuswtsn@aol.com

www.slotcarsmag.com

www.jairuswatson.net
http://www.ratholecustoms.com
Check out some of the cool stuff on my Fotki!


#20 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 30 November 2014 - 04:45 PM

Hi Jairus.......my last build was a McLaren. I need to mix it up a bit with this one so it's not going to be an M8  :crazy:

WEEEEEEEEEE!!!!!!!!!!!!!!


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#21 Pablo

Pablo

    Builder

  • Administrator
  • PipPipPipPipPipPipPipPip
  • 18,437 posts
  • Joined: 20-February 06
  • Gender:Male
  • Location:Cleveland, Tennessee

Posted 30 November 2014 - 05:59 PM

"Once the hinge wire is soldered to the pan, the long pin tube is soldered to it out on the end"

 

Aha ! Neat trick, :good:  Thanks Capt. Rick


Paul Wolcott


#22 Jairus

Jairus

    Body Painter Extraordinaire

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 10,174 posts
  • Joined: 16-February 06
  • Gender:Male
  • Location:Salem, OR

Posted 30 November 2014 - 06:02 PM

Not a Chaparral because there are no good bodies. So that only leaves a Lola T-160?


Jairus H Watson - Artist
Need something painted, soldered, carved, or killed? - jairuswtsn@aol.com

www.slotcarsmag.com

www.jairuswatson.net
http://www.ratholecustoms.com
Check out some of the cool stuff on my Fotki!


#23 dc-65x

dc-65x

    Grand Champion Poster

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 6,934 posts
  • Joined: 14-February 06
  • Gender:Male
  • Location:Captain Rick: The only vintage slot car nut in SW Oregon?

Posted 30 November 2014 - 07:00 PM

Glad you think it might help Pablo. :victory:

 

Jairus, I really wanted to do a Lancer low and wide Chaparral 2H but it came along a bit later that this particular race.   :unknw:  

 

I had decided on the Swede Savage Lola T160 but then something else caught my eye in my "pile-O-vintage" bodies...... :wink3:


Rick Thigpen
Check out Steve Okeefe's great web site at its new home here at Slotblog:
The Independent Scratchbuilder
There's much more to come...


#24 Jairus

Jairus

    Body Painter Extraordinaire

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 10,174 posts
  • Joined: 16-February 06
  • Gender:Male
  • Location:Salem, OR

Posted 30 November 2014 - 08:14 PM

Well, the Ferrari 512 prototype had a mid mounted wing, but Ferrari rarely used it.  Other than that.... I am baffled. 
Watching with interest. 


Jairus H Watson - Artist
Need something painted, soldered, carved, or killed? - jairuswtsn@aol.com

www.slotcarsmag.com

www.jairuswatson.net
http://www.ratholecustoms.com
Check out some of the cool stuff on my Fotki!


#25 endbelldrive

endbelldrive

    Checkered Flag in Hand

  • Member at Peace
  • PipPipPipPipPipPip
  • 1,740 posts
  • Joined: 16-February 06
  • Gender:Male
  • Location:Witless Protection Program

Posted 02 December 2014 - 12:09 AM

I like surprises!  :popcorm1:


Bob Suzuki
8/19/54-8/?/21
Requiescat in Pace





Electric Dreams Online Shop