Has anyone tried rubbing a copper pipe on the rails to reduce prep time between race days on a plastic track?
HO plastic track rails
#1
Posted 13 August 2025 - 06:37 PM
If it's not a Caveman, It's HISTORY! Support Your local raceways!
#2
Posted 14 August 2025 - 06:31 AM
You have, Brian? Do tell!
- NSwanberg likes this
Rob Hayes
Catfish International (HO) Speedway - The Brystal Catfish
Modelville Hobby and NERR - 1/24
MARC/New England - HO
#3
Posted 18 August 2025 - 11:03 AM
You have, Brian? Do tell!
No I haven't. At least not yet. I was hoping someone else may have and I wouldn't need to potentially sacrifice a piece of track. It looks like I won't have a choice.
If it's not a Caveman, It's HISTORY! Support Your local raceways!
#4
Posted 18 August 2025 - 01:00 PM
If anybody knows about copper on plastic track rails it is Jim Rumph. He just texted me that even though Aurora years ago recommended it (using pennies) as a way to maintain rails it does not work. Use the ultra fine foam block. In our club he has learned to bring the correct cleaning supplies to our races. I wouldn't argue with him.
btw Don't use a belt sander.
Remember the Steube bar! (ask Raisin)
SUPPORT YOUR LOCAL RACEWAY!!
"The denial of denial is the first sign of denial." Hank, from Corner Gas
"Death before disco!" Wanda from Corner Gas
Nelson Swanberg 5618
Peace be with all of us and good racing for the rest of us.
Have controller. Will travel. Slot Car Heaven
#5
Posted 18 August 2025 - 07:44 PM
Crocus cloth & fine grit Wet-N-Dry sandpaper on a soft backing (such as Duck Tape) ought to work too.
I intend to live forever! So far, so good.












