Jump to content




Photo

USRA founding


  • Please log in to reply
8 replies to this topic

#1 TSR

TSR

    The Dokktor is IN

  • Full Member
  • PipPipPipPipPipPipPipPip
  • 42,307 posts
  • Joined: 02-February 06
  • Gender:Male
  • Location:Marxifornia

Posted 26 November 2010 - 03:40 PM

While I am finishing the new, long promised slot car history book, I have to make corrections and I ran across this tidbit that I had already forgotten, the actual date of the formation of the USRA:
 

On December 12, 1967, over forty racers from the Los Angeles area met and formed what was later to become the United States Racer Association, or USRA. Lynn Fletcher (Team Dynamic) was elected president of the yet un-named association, with Jeff Martinelli of Matteson Hobbies as VP. Keith Tanaka was named secretary and Team Riggen's Ken Schmidt sergeant at arms. The purpose of the group was to establish a unifying force, something desperately needed if the hobby was to survive in those tumultuous times, when many raceways were closing.


The actual name was not formed and approved until January 9, 1968. The USRA was instrumental in having a voice in what was an attempt to be a surviving manufacturers union, the NCC, or National Competition Committee. The two had very different motivations, and will soon clash, the racers actually winning the day. But did they?

Philippe de Lespinay





#2 DOCinCanton

DOCinCanton

    Posting Leader

  • Subscriber
  • PipPipPipPipPipPipPip
  • 2,887 posts
  • Joined: 22-June 10
  • Gender:Male
  • Location:Canton, OH

Posted 26 November 2010 - 04:28 PM

FWIW, I recall that the two Car Model Series run in the Cleveland Ohio area back in 1967 and 1968, were run under NCC rules. I believe that the slot racing/industry "Car Model" magazine aligned with the NCC, at least for 1/24 car rules. Apparently, the rules that come out from the USRA organization were a little different.

But in 1967 and 1968, the NCC was more established, while the USRA, according to your timeframe, were couple years behind.
Doc Dougherty
GRRR 2016 GT Coupe and Stock Car Champion and Overall Champion
My Series Spring 2016 4" NASCAR, JK LMP State Champion, and Endurance State Champion
My Series 2015 4" NASCAR, GTP and Endurance State Champion
​GRRR 2015 4 1/2" and F1 Champion
​GRRR 2013 & 2014 Evil Flexi Champion
1968 Cleveland Car Model Series race winner - Tom Thumb Raceway, North Royalton, Ohio
​1968 Hinsdale ARCO Amateur runner-up
1967 Parma Raceway Indy 500 Champion

#3 TSR

TSR

    The Dokktor is IN

  • Full Member
  • PipPipPipPipPipPipPipPip
  • 42,307 posts
  • Joined: 02-February 06
  • Gender:Male
  • Location:Marxifornia

Posted 26 November 2010 - 05:21 PM

FWIW, I recall that the two Car Model Series run in the Cleveland Ohio area back in 1967 and 1968, were run under NCC rules.


Dan, the NCC was created in 1969. smile.gif

In 1967 and 1968, the Car Model rules were just that, Car Model rules.

Philippe de Lespinay


#4 eshorer

eshorer

    Race Leader

  • Subscriber
  • PipPipPipPipPip
  • 940 posts
  • Joined: 25-August 07

Posted 26 November 2010 - 08:19 PM

Don't forget THIS DOCUMENT, from June 1968, that shows quite a few of us who are still racing, from an early USRA meeting:

I'm really proud to be in that group.

Eddie
Eddie (not so Fast anymore) Shorer
Team Boola (circa the '60s)

#5 TSR

TSR

    The Dokktor is IN

  • Full Member
  • PipPipPipPipPipPipPipPip
  • 42,307 posts
  • Joined: 02-February 06
  • Gender:Male
  • Location:Marxifornia

Posted 26 November 2010 - 08:48 PM

Mike Steube - Vice President... I'm not sure, but I do think Mike was elected V.P. (Hey Mike, is this correct?)


As far as I can read the period report, there is no mention of a Vice President. Who remembers Team Riggen's Ken Schmidt, named "sergeant at arms"? He briefly raced as a teammate to John Cukras. smile.gif

Philippe de Lespinay


#6 DOCinCanton

DOCinCanton

    Posting Leader

  • Subscriber
  • PipPipPipPipPipPipPip
  • 2,887 posts
  • Joined: 22-June 10
  • Gender:Male
  • Location:Canton, OH

Posted 26 November 2010 - 10:16 PM

Could it be that the Car Model rules moved on to become the NCC rules???
Doc Dougherty
GRRR 2016 GT Coupe and Stock Car Champion and Overall Champion
My Series Spring 2016 4" NASCAR, JK LMP State Champion, and Endurance State Champion
My Series 2015 4" NASCAR, GTP and Endurance State Champion
​GRRR 2015 4 1/2" and F1 Champion
​GRRR 2013 & 2014 Evil Flexi Champion
1968 Cleveland Car Model Series race winner - Tom Thumb Raceway, North Royalton, Ohio
​1968 Hinsdale ARCO Amateur runner-up
1967 Parma Raceway Indy 500 Champion

#7 Keith Tanaka

Keith Tanaka

    Posting Leader

  • Member at Peace
  • PipPipPipPipPipPipPip
  • 2,968 posts
  • Joined: 18-June 06
  • Gender:Male
  • Location:West Covina, CA

Posted 26 November 2010 - 11:07 PM

As far as I can read the period report, there is no mention of a Vice President. Who remembers Team Riggen's Ken Schmidt, named "sergeant at arms" ? He briefly raced as a team mate to John Cukras. smile.gif


I don't recall having a Sergeant at Arms elected at the initial "Charter" member meeting. I think a sergeant at arms was elected at a later meeting.

Keith :rolleyes:

Keith Tanaka
7/6/47-11/1/26
Requiescat in Pace


#8 Keith Tanaka

Keith Tanaka

    Posting Leader

  • Member at Peace
  • PipPipPipPipPipPipPip
  • 2,968 posts
  • Joined: 18-June 06
  • Gender:Male
  • Location:West Covina, CA

Posted 26 November 2010 - 11:45 PM

Could it be that the Car Model rules moved on to become the NCC rules???


I believe the NCC rules were derived from the Car Model rules.

The Rod and Custom rules of 1966 were the first rules used for a major race series. The 1967 Car Model rules were derived from the '66 R&C rules. The '68 Car Model National Championship and ARCO rules were derived from the '67 Car Model rules. The '69 Car Model National Championship rules were similar to the '68 rules and led to the 1970 NCC rules.
Mike Morrissey and John Cukras were key members of the 1970 NCC rules committee with past experience with all of the previous rules used prior to 1970. Lynn Fletcher who was president of USRA in the early years (starting in '68) was a key advisor to all of the rules committees in the '60s, early '70s and thus USRA was a major influence on the rules used in those days.

Keith :rolleyes:

Keith Tanaka
7/6/47-11/1/26
Requiescat in Pace


#9 Roger U

Roger U

    Race Leader

  • Full Member
  • PipPipPipPipPip
  • 563 posts
  • Joined: 03-September 06
  • Gender:Male
  • Location:SoCal

Posted 27 November 2010 - 01:15 AM

On December 12, 1967, over forty racers from the Los Angeles area met and formed what was later to become the United States Racer Association, or USRA. Lynn Fletcher (Team Dynamic) was elected president of the yet un-named association, with Jeff Martinelli of Matteson Hobbies as VP. Keith Tanaka was named secretary and Team Riggen's Ken Schmidt sergeant at arms.


The name of the group was United Slot Racers Association as I recall and according to a paper I have saved from back in the '60s.
Roger Uusitalo





Electric Dreams Online Shop