Jump to content




Photo

Arm winding #1

Closed due to length

  • This topic is locked This topic is locked
3573 replies to this topic

#2601 proptop

proptop

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 469 posts
  • Joined: 17-February 06
  • Gender:Male
  • Location:Upstate NY

Posted 23 February 2011 - 11:11 PM

Dude...that pic is motor porn.... :laugh2:

Hey...do you have a welding supply shop near by?

You might be able to use the Tungsten electrode from a TIG torch?

http://www.weldcraft...ten-electrodes/

Or...
http://cgi.ebay.com/...=item3a6361b6a8

I typed in "Tungsten Electrode"

Tom Hemmes
Insert witty phrase here... 





#2602 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 24 February 2011 - 06:30 AM

Hi Tom,

Thanks :) I may have to try out some of this stuff out at some time. Even though it's for arc welding, it might work as a heater for brazing???

-john
John Havlicek

#2603 wbugenis

wbugenis

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 330 posts
  • Joined: 17-December 09
  • Gender:Male
  • Location:Brooklyn, NY

Posted 24 February 2011 - 08:19 AM

Hi Tom,

Thanks :) I may have to try out some of this stuff out at some time. Even though it's for arc welding, it might work as a heater for brazing???

-john


Yes, I use 1/4 tungsten electrode in my welder.

Bill
William Bugenis

#2604 HarV Wallbanger III

HarV Wallbanger III

    Racing inta OLD age!

  • Member at Peace
  • PipPipPipPipPipPipPipPip
  • 6,165 posts
  • Joined: 19-June 08
  • Gender:Male
  • Location:"Whisper'in Pine Ranch" Northern Nevada Sierras

Posted 24 February 2011 - 01:17 PM

I agree .... THIS IS SLOT PORN!:laugh2:

Barney Poynor
12/26/51-1/31/22
Requiescat in Pace


#2605 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 24 February 2011 - 05:26 PM

Thanks Barney...I guess no more pinups then! :)

Yes, I use 1/4 tungsten electrode in my welder.


OK Bill...then there's another thing to experiment with!

-john
John Havlicek

#2606 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 27 February 2011 - 01:29 PM

I just finished off the first of three builds for Don Weaver. This one is a G27 arm in a Strapnut conversion with a new Hawk endbell, ball bearings on both ends and a set of those stooopid strong Emovendo neos shimmed for an approximately .022" airgap per side.

After adjusting the length of the can and cutting it out, the top of the coils just barely cleared the endbell inside. Getting the magnets epoxied-in at the right spot to center the arm in the field was a real joy (not). I can't say how many times the things jumped out of my hand and/or grabbed stuff around my bench. Then "placing" them in the can is impossible, so you have to get them as close to where you want them...let them fly and then adjust them afterwards. It took as much time cleaning up the JB Weld as it did centering and clamping them. Using another Falcon can cut up as shims, brought the airgap to pretty much exactly where Don and I spoke about, so that was nice. Anyway, after a skim cut on the com, the assembly pretty much went smoothly. The motor draws a little over 2 amps and gets warm, but seems within acceptable limits for sure and the speed the thing revs up and down is pretty funny...about twisting out of your hand. All the build specs were per Don and I was a little skeptical about the G27 arm with these magnets, but no doubt the airgap helps things a lot. The open type can doesn't seem to hurt the field much at all, but the can sides the magnets are epoxied to seem to stay cool with all that "breathjing room". A lot of work, but a pretty danged cool motor!

Posted Image

-john
  • MarcusPHagen likes this
John Havlicek

#2607 Alchemist

Alchemist

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,840 posts
  • Joined: 11-November 09
  • Gender:Male
  • Location:Far, far away

Posted 27 February 2011 - 02:17 PM

Another awesome job John!

How'd the motor sound please?

Ernie
Ernie Layacan

#2608 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 27 February 2011 - 03:58 PM

Thanks Ernie :)

How'd the motor sound please?


Well...it sounded like what I think a G28 should sound like, but it spins up and down very fast because of those magnets. No doubt that gearing will be very different from the same arm in an average setup because of this, but Don will have to figure all that out. I like the new Hawk endbell and it is much more compact than a C-can endbell, but I "like" the C-can endbell because of a little extra room for brushes and air circulation. Also, the spring posts on the Hawk are very short so that limits spring choices as well...forget about the Camens. The nice thing about the Hawk endbell is that it is much closer to a direct fit. It's a little short, but only slightly too wide. On Don's motor, I was able to simply thin-out the inside of the can sides and it snapped right in. Then, to line it up for drilling, all I had to do was shim the top and bottom temporarily and it fit perfectly. Like every motor and/or armature I've done...I learned some more on this one!

-john
John Havlicek

#2609 Don Weaver

Don Weaver

    Checkered Flag in Hand

  • Subscriber
  • PipPipPipPipPipPip
  • 1,913 posts
  • Joined: 26-October 07
  • Gender:Male
  • Location:Lexington. SC

Posted 27 February 2011 - 04:26 PM

John,

AWESOME!! :wub: Can't wait to load this in a lightweight drag chassis and punch it! :shok: Wonder how long it will take to learn how to keep from burning the tires off the rim? Many thanks.....

Don Weaver

Don Weaver

​A slot car racer who never grew up!

 

The supply of government exceeds demand.
L.H. Lapham
 
If the brain-eating amoeba invades Washington
it will starve to death...


#2610 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 27 February 2011 - 05:37 PM

Hey thanks Don and you're most welcome! :) Now for the next two!

-john
John Havlicek

#2611 jockefors

jockefors

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 308 posts
  • Joined: 13-November 10
  • Gender:Male
  • Location:Sweden

Posted 28 February 2011 - 12:11 AM

nice engins ..
howe do they run comperd too a orginal strapcan g27 engine or a c-can x12 engin ?
If cars were built to fly... they will have wings...

Joakim Forsman

#2612 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 28 February 2011 - 06:46 AM

The big question here isn't the motors so much as the magnets. This type of neo is very VERY strong so the "hole" for the arm is something of a guessing game. If the air gap were set as you would for ceramic magnets...even very strong ceramic magnets, the field would be too strong and the motor would be getting hot just from the arm trying to spin. The other question is the arm, while a G27 arm is a pretty strong arm...how to make it "play well" with these magnets is something of a question. The last variable here is the fact that the neos will lose magnetic force from heat that might be tolerated well by other magnet types. Since this motor will be in a drag car, it shouldn't get hot enough in those short runs for that to be a problem. The motor will probably have great brakes...but that's not so important in a drag car, but it should also have very good acceleration which is.

We weren't flying totally blind on this project since Don had some information going in about how to proceed, but how the motor will actually perform compared to a regular G27 is unknown...by me at least. Comparing it to an X-12 C-can doesn't make sense. The open can here is really about both light weight (versus a full can) and better cooling from all that air circulation.

I'm not sure what class restrictions this motor would be run under, but I would think that for drag racing (and assuming no restrictions) a motor like above with a #25 or a #24 would be very fast/lightweight and competitive. For those short runs, it's even possible that a #23 would work...but getting that torque and RPMs to the track..."hooking it up"...might be a problem.

I've done motors similar to this one with regular ceramic magnets and with a #26 wind they're pretty deadly in a road car. Kim Lander has had some experience running them and says they always get people's attention when he gets them on the track.

-john
John Havlicek

#2613 Alchemist

Alchemist

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,840 posts
  • Joined: 11-November 09
  • Gender:Male
  • Location:Far, far away

Posted 28 February 2011 - 01:00 PM

John,

For me, it's very exciting to see the "unique" hybrid of a motor you always come up with along with the technical observation/analysis you provide about the particular motor you just constructed. Again, for me, It's always an inspiration to view your motors along with the other members rewinds like Vic and Robert for example!

Thank you gents!

Ernie
Ernie Layacan

#2614 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 28 February 2011 - 02:29 PM

Hi Ernie and thanks mucho as always. I get a little frustrated at time that more people are still not doing this...but hope springs eternal :)

-john
John Havlicek

#2615 Robert V.

Robert V.

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 350 posts
  • Joined: 14-November 09

Posted 28 February 2011 - 07:23 PM

Hi John that motor looks awsome and i am shore it screams with that combo, i think you have plenty of metal surface there to maintaine a good magnetic field more than many of those open motors the wing car guys use.
Robert Vaglio

#2616 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 28 February 2011 - 09:45 PM

Thanks Robert :) The strength of the field is still really high with the cut away can. The thing is, the can helps to "shape" the field and even "focus it"...even so, this motor runs like there's tons of magnet there. The next two for Don use the same magnets, but in full cans.

-john
John Havlicek

#2617 jockefors

jockefors

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 308 posts
  • Joined: 13-November 10
  • Gender:Male
  • Location:Sweden

Posted 01 March 2011 - 12:45 AM

hi i woud love too test one just too see if or howe it runns.. like the idea

if you woud sell one whats its price ? or can you build one for me with a hawk engine and like a 459 arm in a 505 holei hawe arms so if you will i can send you one or too
If cars were built to fly... they will have wings...

Joakim Forsman

#2618 Champion 507

Champion 507

    Checkered Flag in Hand

  • Full Member
  • PipPipPipPipPipPip
  • 1,522 posts
  • Joined: 06-March 09
  • Gender:Male
  • Location:OK

Posted 01 March 2011 - 03:03 AM

HAVLICEK QUOTE:
I get a little frustrated at time that more people are still not doing this...but hope springs eternal :)

*********************************************************************************************

Dood,
That 507 guy over there at that closed thread is FRUSTRATED that he really hasn't been able to do much in over a year either :angry:

He'd be in the middle of this too...BIG TIME!!!
Doug Azary
"We offer prompt service... no matter how long it takes!"
"We're not happy unless you're not happy"
"You want it when?"

#2619 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 01 March 2011 - 06:46 AM

hi i woud love too test one just too see if or howe it runns.. like the idea

if you woud sell one whats its price ? or can you build one for me with a hawk engine and like a 459 arm in a 505 holei hawe arms so if you will i can send you one or too


Hi Joakim,

This is really just an assembly job with a little fabrication (if you wanted the open can) to produce an inexpensive "strap motor". With a Dremel tool and some stock parts, anyone who's handy should be able to build something like that motor. I don't do this as a "business" and "spare time" is pretty precious right now, so you'd be MUCH better off having it done nearby. Really, the whole point of this thread is to get other people to try winding arms and building-up motors!

Dood,
That 507 guy over there at that closed thread is FRUSTRATED that he really hasn't been able to do much in over a year either :angry:

He'd be in the middle of this too...BIG TIME!!!


I hear you Doug, and it may not seem so, but I do this stuff for an hour or so here and there when ever I get the chance...and life has been difficult and complicated for me over the last couple of years. I'm frustrated that way too, but over time you get faster and more gets done in the little time you can manage. I hope to see more of your builds!

-john
John Havlicek

#2620 Victor Poulin

Victor Poulin

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,097 posts
  • Joined: 04-March 08
  • Gender:Male
  • Location:Raymond, NH

Posted 01 March 2011 - 09:48 AM

HAVLICEK QUOTE:
I get a little frustrated at time that more people are still not doing this...but hope springs eternal :)

*********************************************************************************************

Dood,
That 507 guy over there at that closed thread is FRUSTRATED that he really hasn't been able to do much in over a year either :angry:

He'd be in the middle of this too...BIG TIME!!!



A little birdy tells me that, that frustrated guy has been sneeking around playing behind our backs :rolleyes: :laugh2:
and building some pretty impressive motors :D I think that guy needs to get his butt back into the mix ;)
Alright, who cut the cheese?

#2621 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 01 March 2011 - 12:03 PM

I finished off motor #2 of 3 for Don Weaver. This one's another G27 arm (approx .480" diameter) but in a full can. Magnets are the same Emovendo neos and they had to get shimmed way down to get close to the .020" target hole. I wound up overshooting by a few thousandths and the airgap is somewhere around .017" per side. Aside from all the shimming, just getting the arm to fit in the setup was a chore. I shortened the com a little, shortened the tail spacer as much as I could without wrecking the tail end of the arm and then had to thin out the flange on both the can and endbell bushings to get the thing in there with room for a thin arm washer at each end. The motor sounds very strong and, just like the other one, spins up and down instantly.

Posted Image

-john
John Havlicek

#2622 jockefors

jockefors

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 308 posts
  • Joined: 13-November 10
  • Gender:Male
  • Location:Sweden

Posted 01 March 2011 - 03:36 PM

hi if you hawe problen with fiting the arm in the can try a g7 459 arm i think they are shorter
If cars were built to fly... they will have wings...

Joakim Forsman

#2623 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 01 March 2011 - 05:06 PM

Hi Joakim,

This wasn't a job to get an arm to fit the setup...there are all kinds out there! This particular arm was supplied to me by Don Weaver to be installed in this motor.

-john
John Havlicek

#2624 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 01 March 2011 - 05:06 PM

Hi Joakim,

This wasn't a job to get an arm to fit the setup...there are all kinds out there! This particular arm was supplied to me by Don Weaver to be installed in this motor.

-john
John Havlicek

#2625 Don Weaver

Don Weaver

    Checkered Flag in Hand

  • Subscriber
  • PipPipPipPipPipPip
  • 1,913 posts
  • Joined: 26-October 07
  • Gender:Male
  • Location:Lexington. SC

Posted 02 March 2011 - 07:57 AM

John,

I'm thinking that the smaller airgap and full can will make this one more of a monster motor than the 'strapnut'! And then I think about the 23/25 motor you are going to do next.....WOW!!

Don Weaver

Don Weaver

​A slot car racer who never grew up!

 

The supply of government exceeds demand.
L.H. Lapham
 
If the brain-eating amoeba invades Washington
it will starve to death...






Electric Dreams Online Shop