Jump to content




Photo

Arm winding #1

Closed due to length

  • This topic is locked This topic is locked
3573 replies to this topic

#2351 wbugenis

wbugenis

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 330 posts
  • Joined: 17-December 09
  • Gender:Male
  • Location:Brooklyn, NY

Posted 24 December 2010 - 08:52 AM

John,

What diameter are the Euro Arms when you end up grinding down the stacks?

I'm very interested in any information you have on your Euro arms.


Gary,

The specs are spelled out in the "Winding for Eurosports" thread here:

http://slotblog.net/...showtopic=26598

and will be updated as development continues on these motors.

Bill
William Bugenis




#2352 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 24 December 2010 - 09:02 AM

Ah thanks for that Bill...so:

Lou Pirro has been developing eurosport setups for both smaller and bigger diameter arms for some months now.


The R&D has been coming at this from both ends...larger AND smaller diameter arms in different setups.

-john
John Havlicek

#2353 Victor Poulin

Victor Poulin

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,097 posts
  • Joined: 04-March 08
  • Gender:Male
  • Location:Raymond, NH

Posted 24 December 2010 - 09:57 AM

Hello John , Bill, Ernie,Robert,Doug, Gary and all the regulars to this thread.
I just wanted to take this this time to wish you all a very Merry Christmas and Happy/healthy New Years !, and to thank you all, for all the help and sharing of info that has brought new
life to an old hobby.

It kind of brings me back to when I was a kid just getting into the hobby. The excitement of learning and trying new things takes me back to those days :)

May we continue to grow together as a family, and have even MORE fun in the new year !!


Vic/Joe+Jennie
Alright, who cut the cheese?

#2354 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 24 December 2010 - 10:16 AM

The same right back to you and yours Vic!

It kind of brings me back to when I was a kid just getting into the hobby. The excitement of learning and trying new things takes me back to those days :)


...except NOBODY was telling people very clearly what exactly they were doing that I met. Since racing in those days was all "open", the "magic inside the endbell" was all top secret. :angry::unsure: After 118 pages and somewhere close to 75,000 views and around 2,300 replies (not to mention public failures and small successes), I've done my best to get people to dig into motors and have a whack at what's inside.

I think it also bears repeating that without those responsible for "keeping the lights on" at SlotBlog, none of this would be possible. People can come here and not just learn some history, but see people like Rick, Jairus., Dennis, Noose, Tony, Philippe and others I'm forgetting actually do it still today. There's real craft involved with slotcar building...not just going fast and winning races (although that's great too!), and many slot cars represent such a high level of workmanship that they can be appreciated even by people who've never seen a slot car before. SlotBlog does a heck of a lot to keep that going just by providing this forum.

Merry Christmas and Happy Chanukah!

-john
John Havlicek

#2355 GearBear

GearBear

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 363 posts
  • Joined: 04-February 10
  • Gender:Male

Posted 24 December 2010 - 08:32 PM

Right back at everyone... Merry Christmas!


John, Bill,

Thanks for the reminder about the other thread. I'm still interested in these arms. I'm going to have to see if I can find some time next week while I'm off to take one of the arm blanks that I got from Bill and shorten the stack down to .300 so that I can fit one into one of my current Euro Setups. I need one that is .300 long on the stack and .810 long overall with a .480 or smaller diameter. I don't really feel like honing out the magnets at this point on this setup.
Gary Johnson

#2356 wbugenis

wbugenis

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 330 posts
  • Joined: 17-December 09
  • Gender:Male
  • Location:Brooklyn, NY

Posted 24 December 2010 - 10:46 PM

Right back at everyone... Merry Christmas!


John, Bill,

Thanks for the reminder about the other thread. I'm still interested in these arms. I'm going to have to see if I can find some time next week while I'm off to take one of the arm blanks that I got from Bill and shorten the stack down to .300 so that I can fit one into one of my current Euro Setups. I need one that is .300 long on the stack and .810 long overall with a .480 or smaller diameter. I don't really feel like honing out the magnets at this point on this setup.


Gary,

If you take the stack you have apart, you will ruin the coating. Your best bet is to wind the stacks as they are and practice your welding technique. Most important to get consistent, low resistance welds. Not easy.
I can provide a coated and ground stack with a drill blank in any size you want when you are ready. Depending on what you are starting with, just honing out an existing setup might not be the ticket to make the arms work. Lou Pirro has been developing setups for .500 and .460 Euro arms and has had some interesting results. We will update as results come in.
William Bugenis

#2357 GearBear

GearBear

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 363 posts
  • Joined: 04-February 10
  • Gender:Male

Posted 25 December 2010 - 01:41 AM

Thanks Bill. I'm sure I'll be contacting you soon then.
Gary Johnson

#2358 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 26 December 2010 - 04:25 PM

I got back the #24 arm from Bill Bugenis who balanced it beautifully. It is ultras smooth and even at 6V is...frightening:

Posted Image

Here it is in it's Strapnut setup...all dressed-up for the prom:

Posted Image

Of course, this motor needs shunts and spring insulation and really deserves ball bearings as well, but I just HAD to give it a spin-up. I don't know about this one, the arm may just be too much for the setup, but it seems at least possible from the very short spins I gave it. I tried running it on a power supply at low voltage...but it just instantly tripped the PS's circuit protection :blink: It does run on my car starter though :shok:

-john
John Havlicek

#2359 HarV Wallbanger III

HarV Wallbanger III

    Racing inta OLD age!

  • Member at Peace
  • PipPipPipPipPipPipPipPip
  • 6,165 posts
  • Joined: 19-June 08
  • Gender:Male
  • Location:"Whisper'in Pine Ranch" Northern Nevada Sierras

Posted 27 December 2010 - 01:07 PM

Beautiful work John as always!

Barney Poynor
12/26/51-1/31/22
Requiescat in Pace


#2360 Prof. Fate

Prof. Fate

    a dearly-missed departed member

  • Member at Peace
  • PipPipPipPipPipPipPipPip
  • 6,580 posts
  • Joined: 20-February 06
  • Gender:Male
  • Location:Salt Lake City, UT

Posted 27 December 2010 - 01:56 PM

Hi

John, what is the worst that can happen? It sings, it is wonderful, but you then get to do another! I call that a "win-win".

Fate
Rocky Russo
3/6/48-1/1/12
Requiescat in Pace

#2361 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 27 December 2010 - 05:39 PM

Thanks Barney :)

Rocky, oh I'm not worried about the motor. It has loads of rpms, but seems shy on torque. That seems like it might be because I reached the limit on this setup/magnets...but I'm going to install the shunts and see if it's because the arm is starved for current. Without better testing equipment, I'm just going by ear and feel.

-john
John Havlicek

#2362 Victor Poulin

Victor Poulin

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,097 posts
  • Joined: 04-March 08
  • Gender:Male
  • Location:Raymond, NH

Posted 28 December 2010 - 04:27 PM

Thanks Barney :)

Rocky, oh I'm not worried about the motor. It has loads of rpms, but seems shy on torque. That seems like it might be because I reached the limit on this setup/magnets...but I'm going to install the shunts and see if it's because the arm is starved for current. Without better testing equipment, I'm just going by ear and feel.

-john


What are you going to use for shunt wire John? A set of jumper cables?? :laugh2:

Vic
Alright, who cut the cheese?

#2363 Alchemist

Alchemist

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,840 posts
  • Joined: 11-November 09
  • Gender:Male
  • Location:Far, far away

Posted 28 December 2010 - 05:50 PM

Hi John, everyone,

I did search to my question but to no avail.

As a right hander, I believe you wrap the wire "clockwise - CW" on the armature pole. When finished with the desired number of wire turns on the starting pole, you then continue to wrap the wire "CW" moving in the "CCW" direction of the armature poles.

My question please, does it make a difference which direction you wrap the wire (either CW/CCW) around the pole and which pole you wrap in sequence? What are the consequences please?

Thank you for your time.

Ernie
Ernie Layacan

#2364 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 28 December 2010 - 06:37 PM

What are you going to use for shunt wire John? A set of jumper cables?? :laugh2:


Hi Vic :) Nope...when you think about it, the brushes are merely a slip-fit in the hoods...so they carry some current (although the amount probably varies over time and from side-to-side). I use very soft/fine stranded lead wire for shunts, but only part of the wire since I figure the hoods also carry some current. Actual "shunt wire" that you buy isn't very thick at all, and I generally use more than that...gauge-wise. Anyway, before I send the motor to it's new home (and I'm stoked about where it's going!), I'll insulate the springs and add the shunts and I expect it to make a noticeable difference.

Hi Ernie,

Think of the poles on a motor as individual electromagnets...which is what they are. There's no reason I can see or imagine that it matters which direction you wind the poles and which direction you sequence winding the poles...as long as you're consistent of course and do all three poles the same way. I've tried it both ways and have found no difference, but timing of course DOES make a difference.

-john
John Havlicek

#2365 Alchemist

Alchemist

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,840 posts
  • Joined: 11-November 09
  • Gender:Male
  • Location:Far, far away

Posted 28 December 2010 - 11:37 PM

Thank you for the info John!

Ernie
Ernie Layacan

#2366 Robert V.

Robert V.

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 350 posts
  • Joined: 14-November 09

Posted 02 January 2011 - 02:21 PM

Hi guys

It's been a little slow around here i assume because of the holidays so i thought i would do a rebuild and rewind on the motor below for those few out there who don't know what the motor is it's an MPC DYNA rewind the standard motor has a white end bell and the rewinds have the red one, the second picture shows the motor broken down most of the motor looks good except the brush assemble which is missing the spring and fiber parts to keep tension on the brushes i will have to figure some thing out for that, also should be fun tearing down the arm with that epoxy on the windings.
Posted Image
Posted Image
Robert Vaglio

#2367 Victor Poulin

Victor Poulin

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,097 posts
  • Joined: 04-March 08
  • Gender:Male
  • Location:Raymond, NH

Posted 02 January 2011 - 05:48 PM

Robert,
Cant wait to see the progress on this one! What size motor is this ? Is it similar to a 36-D? I haven't had the pleasure to tinker with one yet lol.

Hope you all had a great Christmas and New Years!! I know we did. :D

Even though money was very tight for us this year, we had one of the best yet! Go figure :laugh2:


Vic
Alright, who cut the cheese?

#2368 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 02 January 2011 - 05:59 PM

These make good projects Robert, and those brush parts are available with some digging...maybe even from some folks here if you post the need. Getting that epoxy off there isn't going to be easy, but it's often "do-able". That arm also appears to have the Champion-type 36D com (or something that at least looks awfully close to the Champion)...and it's about the best of that size com I've seen for a three-pole motor...other than the hard to find Tradeship 36D coms (the blue ones that Electric Dreams used to sell). Definitely a fun and not-so-run-of-the-mill project!

-john
John Havlicek

#2369 Robert V.

Robert V.

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 350 posts
  • Joined: 14-November 09

Posted 02 January 2011 - 10:31 PM

Hi Vic

The MPC DYNA Can is just a little smaller than a 36D but they have smaller more powerful mags which give it better brakes and better rpm in general a better performer all around than a stock 36D about the same performance as a Champion 36D, if you get the chance give one of these a try i think you will like it.

Hi John

I am pretty shore the comm is original to the motor and it does look pretty good for a performance build if i can clean it up, I have already stripped the wire off and this arm has something i have never seen before it has some kind of heat resistant insulaters inbetween each stack which i have removed and will replace with furnace cement. I am still thinking about the brush gear if i can't find replacements i will have to try and scratch build something. I hope every body had a happy and safe holiday.
Robert Vaglio

#2370 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 03 January 2011 - 06:29 AM

I have already stripped the wire off and this arm has something i have never seen before it has some kind of heat resistant insulaters inbetween each stack



Those sound like the things Champion used, but they covered the stack ends and yours seems to have regular fibre stack insulators at the ends. If they are the Champion pieces, they work very well at preventing shorts, but do kinda take up space.

-john
John Havlicek

#2371 Robert V.

Robert V.

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 350 posts
  • Joined: 14-November 09

Posted 05 January 2011 - 05:08 PM

Hi guys

A small update, the first pic is for Vic and any body else who wants to see the size difference between a Cox 36D and the MPC DYNA Can, the second pic shows the cleaned up arm with the furnace cement for insulation and i think the comm cleaned up pretty well i was also able to find some ball bearings in my stash so i figured why not the bearing in the can has been soldered and the end bell one will need some epoxy so it won't move around either that or i will make some kind of fixture to hold it in place or just install the flange on the inside.
Posted Image
Posted Image
Robert Vaglio

#2372 havlicek

havlicek

    OCD Rewinder

  • Subscriber
  • PipPipPipPipPipPipPipPip
  • 11,198 posts
  • Joined: 20-August 07
  • Gender:Male
  • Location:NY

Posted 05 January 2011 - 05:57 PM

Looks great Robert...onward and upward :)

-john
John Havlicek

#2373 Robert V.

Robert V.

    On The Lead Lap

  • Full Member
  • PipPipPipPip
  • 350 posts
  • Joined: 14-November 09

Posted 05 January 2011 - 06:28 PM

Hi John and thanks next up rewinding as soon as my 27gauge wire shows up in the mail until than i will set up the spacers to center the arm in the can and fix the ball bearing to the enbell.
Robert Vaglio

#2374 Victor Poulin

Victor Poulin

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,097 posts
  • Joined: 04-March 08
  • Gender:Male
  • Location:Raymond, NH

Posted 06 January 2011 - 11:51 AM

Robert,
Thanks for the pics. Your right, there's quite a difference between the two motors! Looks like the arm cleaned up real nice.;)

Keep us posted.
Vic
Alright, who cut the cheese?

#2375 Alchemist

Alchemist

    Posting Leader

  • Full Member
  • PipPipPipPipPipPipPip
  • 2,840 posts
  • Joined: 11-November 09
  • Gender:Male
  • Location:Far, far away

Posted 06 January 2011 - 11:10 PM

Happy New Year Robert!

I have never seen a Dyna Can - only heard about them. Thanks for the motor comparison picture. It reminds me of a much bigger "hemi" can due to the endbell color and shiny can! Looks good!

Happy New Year to you too Vic!!!

Ernie
Ernie Layacan





Electric Dreams Online Shop