……..And even more goodies for the Checkpoint Cup Race…………..and I haven't even finished the damned F1 cars yet………sigh………….back to work!…………….DC
Scratchbuilt chassis gallery
#2301
Posted 28 December 2014 - 11:49 PM
- Gator Bob likes this
"DCR Slot Cars" on FaceBook
#2302
Posted 28 December 2014 - 11:54 PM
Don, those are outstanding, and guys, I can tell you that Don's Chassis really work well on the Buena Park King Track....
- Gator Bob likes this
Mill Conroy
AKA : TWO LAP CONROY, Anointed Trigger Monkey by Mike Swiss
Deal me life's toughest cards, without chance for hope nor fame, just let me play this one last hand, and I'll win this whole damn game.
Second Most Interesting Man in the World.
#2303
Posted 28 December 2014 - 11:59 PM
Sweet looking race cars Don.
Good luck with them.
Bob Israelite
#2304
Posted 29 December 2014 - 10:31 PM
Specs on the new frame -
RGeo DS3 brass
JK ( I think ) bracket
Chicagoland guide tongue brace
Weight - 47.8g
Guide lead - .950
Wheelbase - 3.94
.055 outer rails
2 rails of .047 on each side, soldered full length
3rd .047 half-rail added at front as filler and can be soldered to stiffen up slightly
.047 tuning fork into 3/32 square tubing
obSCEne Chassis
HVR BB Fronts
Bodies by Weaver
"There is no such thing as a race you are destined to lose. You will always have a chance."
#2305
Posted 30 December 2014 - 06:15 PM
A motor is only as fast as the chassis it's in.
Dominic Luongo
Like Dominator Custom Chassis on Facebook
NERR photos from 2012-April 2016
NERR photos from 2016 to now
#2307
Posted 02 January 2015 - 03:28 PM
New Z-Rail Can-Am for John Martin, should weigh 103-104 built up
…That looks nice,I would like to try building something like that to test…..if I could only find time………sigh………nice work!…….DC
- Cap Henry likes this
"DCR Slot Cars" on FaceBook
#2308
Posted 02 January 2015 - 11:33 PM
….Ok race fans just to prove I have no life,here is one of the DCR F1 chassis Iv built for the Checkpoint Cup race next weekend.The chassis has a removable 8gram center weight so the car can be raced at 92g or 100g depending on the track or the local rules…..More to come as the Madness at DCR continues!….Thanks for having a look……I wish everyone a great 2015!……DC
- glueside likes this
"DCR Slot Cars" on FaceBook
#2309
Posted 02 January 2015 - 11:35 PM
Beautiful build Don, just like Jewelry, hope to see you out at the race tomorrow !
Mill Conroy
AKA : TWO LAP CONROY, Anointed Trigger Monkey by Mike Swiss
Deal me life's toughest cards, without chance for hope nor fame, just let me play this one last hand, and I'll win this whole damn game.
Second Most Interesting Man in the World.
#2310
Posted 03 January 2015 - 05:56 AM
…...Hot off the chassis jig at 2:30am is DCR #66….This is the first Can-Am build with the new "Re-Worked" nose piece,,this adds a little weight but should make the front of the chassis much stronger.This chassis is for Mr Gary Donahoe………..Now to get a few hours sleep and Im off to BPR to race!………………DC
"DCR Slot Cars" on FaceBook
#2311
Posted 03 January 2015 - 08:28 AM
A motor is only as fast as the chassis it's in.
Dominic Luongo
Like Dominator Custom Chassis on Facebook
NERR photos from 2012-April 2016
NERR photos from 2016 to now
#2312
Posted 03 January 2015 - 11:21 PM
…..Well I only got to test the new DCR F1 chassis for about 5-minutes before they turned the "King" track over to a kid with a rental car……but the new car seemed to run good,,with no time to tune on it the I was able to run several 3.9s laps ………Gary Donahoe tested his DCR F1 later in the evening running in the 4.0s……….so far it looks good!………….Take care………………..DC
- Tim Neja likes this
"DCR Slot Cars" on FaceBook
#2313
Posted 05 January 2015 - 12:03 AM
#2316
Posted 18 January 2015 - 10:20 PM
Possibly the first Retro win for a car with a movable droparm.
- Gator Bob and DCR like this
Mike Swiss
Inventor of the Low CG guide flag 4/20/18
IRRA® Components Committee Chairman
Five-time USRA National Champion (two G7, one G27, two G7 Senior)
Two-time G7 World Champion (1988, 1990), eight G7 main appearances
Eight-time G7 King track single lap world record holder
17B West Ogden Ave., Westmont, IL 60559, (708) 203-8003, mikeswiss86@hotmail.com (also my PayPal address)
Note: Send all USPS packages and mail to: 692 Citadel Drive, Westmont, Illinois 60559
#2317
Posted 18 January 2015 - 10:38 PM
…..Well I only got to test the new DCR F1 chassis for about 5-minutes before they turned the "King" track over to a kid with a rental car……but the new car seemed to run good,,with no time to tune on it the I was able to run several 3.9s laps ………Gary Donahoe tested his DCR F1 later in the evening running in the 4.0s……….so far it looks good!………….Take care………………..DC
Very solid looking F1 Don.
Matt Sheldon
Owner - Duffy's SlotCar Raceway (Evans, CO)
#2318
Posted 31 January 2015 - 06:03 AM
Here a new one I just finished up for Greg Burstein for today's NERR event.
.032 nose
.064 pans and rear weight
Swiss 1.380" bracket
Slick 7 tongue
8 rails of .047 with a .025 wishbone limiter
Weights in at 58 grams, race trim with a little weight at 111 grams
A motor is only as fast as the chassis it's in.
Dominic Luongo
Like Dominator Custom Chassis on Facebook
NERR photos from 2012-April 2016
NERR photos from 2016 to now
#2319
Posted 31 January 2015 - 10:46 AM
Anthony 'Tonyp' Przybylowicz
5/28/50-12/20/21
Requiescat in Pace
#2320
Posted 31 January 2015 - 10:39 PM
#2322
Posted 07 February 2015 - 03:43 PM
I LIKE it!
Remember, two wrongs don't make a right... but three lefts do! Only you're a block over and a block behind.
#2323
Posted 07 February 2015 - 04:02 PM
A very wide F1.
How does it work Don?
#2324
Posted 07 February 2015 - 05:31 PM
Odd. But almost anything with a tuning fork works. Let us know what it does.
GVP
12/4/49-4/17/24
Requiescat in Pace
#2325
Posted 07 February 2015 - 09:13 PM
If you look at the build date, is was built in 2013 LOL
Still cool, I can't cut stuff like that LOL